Sony KDL-48R510C Operating Instructions - Page 26
Channel, Show/Hide Channels
View all Sony KDL-48R510C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Horizontal Center Adjusts the horizontal position of the picture. Vertical Center Adjusts the vertical position of the picture. PC Settings Adjust the picture size, see page 18. Channel Signal Type Cable: Select if you are receiving cable channels via Cable TV provider. Antenna: Select if you are using an antenna. Auto Program Automatically sets up the channel list on the TV for all receivable channels. Select [Auto Program] then press . Add Digital Channels Select [Add Digital Channels]. Select [OK] to add digital channels. Show/Hide Channels Allows you to show or hide channels that appear when you use the CH +/- buttons. Press / to scroll through the channels until you find the channel you want to show or hide. Then press to select it. Press / to determine if the channel will be shown or hidden. Then press to select it. Edit Channel Labels Allows you to assign labels (such as station call letters) to channel numbers. Press F/f to scroll through the channel numbers. Then press to select the channel number that you want to assign a label. Press F/f to scroll through the label characters ([A-Z], [0-9], etc.). Press g to move to the next character. Repeat the previous steps to add up to seven characters to the label. When finished, press . Analog Channel Adjustment Channel: Selects a channel number. Analog Fine Tune: [Custom] selection allows you to fine-tune the selected analog channel manually if you feel that a slight tuning adjustment may improve picture quality. Select [Auto] to adjust to the most appropriate analog channel. Audio Filter: Select [Low] or [High] to improve the sound of individual channels when distortion occurs in mono broadcasts. 26US