Sony KDL-50W700B Operating Instructions (Setup Guide) (Large File - 16.17 MB) - Page 11
Detaching the Table-Top, Stand from the TV, To detach the Table-Top Stand from the TV - settings
View all Sony KDL-50W700B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
~ • If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. Detaching the Table-Top Stand from the TV To detach the Table-Top Stand from the TV, remove the screws fixed in step 2. ~ • Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV. • When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is larger than the TV. • To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface. • Once the Stand Necks are detached from the Stand, be sure to keep the Stand Necks and screws in a safe place. • Be sure the TV is vertical before turning on. To avoid uneven picture uniformity do not power on the TV with the LCD panel facing down. • When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original holes on the rear of the TV. Soft cloth Stand Necks Stand US 11 US