Sony KDL-52XBR7 Operating Instructions - Page 8
Bundling the Connecting Cables, Securing the TV, Prevent the TV from Toppling Over
UPC - 027242748095
View all Sony KDL-52XBR7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Bundling the Connecting Cables You can bundle the connecting cables as illustrated below. AC IN ~ • Do not bundle the AC power cord with other connecting cables. Securing the TV Sony strongly recommends taking measures to prevent the TV from toppling over. Unsecured TVs may topple and result in property damage, serious bodily injury or even death. Prevent the TV from Toppling Over s Secure the TV to a wall and/or stand. s Do not allow children to play or climb on furniture and TV sets. s Avoid placing or hanging items on the TV. s Never install the TV on: • slippery, unstable and/or uneven surfaces. • furniture that can easily be used as steps, such as a chest of drawers. s Install the TV where it cannot be pulled, pushed, or knocked over. s Route all AC power cords and connecting cables so that they are not accessible to curious children. Use a Sony TV Stand Use a Sony specified TV stand (see page 2) and follow the instruction manual provided with the Sony TV stand. If a Sony specified TV stand is not used, consider the following recommended measures. Recommended Measures to Secure the TV Secure the Stand for the TV Make sure the TV stand can adequately support the weight of the TV. Use two angle braces (not supplied) to secure the stand. For each angle brace use the appropriate hardware to: • attach one side of the angle brace to the wall stud. • attach the other side to the TV stand. Angle brace Stand Secure the TV to the Stand Use the optional hardware listed below (not supplied): • M6 × 10-12 mm anchor bolt (screwed into the TV's Table-Top Stand) • A screw or similar (attach it to the TV stand) 8