Sony KDL52Z5100 Operating Instructions - Page 7
Using a Wall-Mount Bracket - installation guide
UPC - 027242756854
View all Sony KDL52Z5100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Getting Started Using a Wall-Mount Bracket All models except the 52 inch (measured diagonally) model can be mounted to a wall using the Wall-Mount Bracket (not supplied) out of the box as packaged. If you are mounting the 52 inch model to a wall, remove the Table-Top Stand. For removing the Table-Top Stand, refer to the instructions attached to the TV. Prepare the TV for the Wall-Mount Bracket before making cable connections. Sony strongly recommends that you use the Wall-Mount Bracket model designed for your TV (see page 45) and that wall-mounting of your TV should be performed by a Sony dealer or licensed contractor. • Follow the instruction guide provided with the Wall-Mount Bracket for your model. You may also need to refer to the online Reference Book for additional information for your TV model. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV's weight. • Be sure to use the screws supplied with the Wall-Mount Bracket when attaching the mounting hooks to the TV set. (Do not use the screws that are intended for the Table-Top Stand attachment.) The supplied M6 screws are designed so that they are 8 mm to 12 mm in length when measured from the attaching surface of the mounting hook. The diameter and length of the screws differ depending on the Wall-Mount Bracket model. Use of screws other than those supplied with the bracket may result in internal damage to the TV set or cause it to fall, etc. 8-12 mm M6 screw (supplied with the Wall-Mount Bracket) Mounting Hook Rear of the TV set • Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to attach the Table-Top Stand. Keep the screws away from small children. When you are using the Table-Top Stand, be sure to read page 17. 7