Sony KDP-57XBR2 Primary User Manual (Large File - 14.16 MB) - Page 25
Connection, Description - remote
View all Sony KDP-57XBR2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Rear Panel 1 2 6 3 4 5 Setting Up the Projection TV 8 1 9 2 DIGITAL AUDIO (OPTICAL) OUT PCM/DOLBY DIGITAL q; 7 L L qa R R SUB WOOFER OUT qs AUDIO OUT FIX VAR L qd R Connection 1 VHF/UHF 2 CABLE 3 S VIDEO IN 1/3/4 4 VIDEO IN 1/3/4 VIDEO/L(MONO)-AUDIO-R 5 SELECT OUT 6 HD/DVD IN (1080i/720p/480p/480i) VIDEO IN 5/6 7 CONTROL S IN/OUT 8 DIGITAL AUDIO (OPTICAL) OUT PCM/DOLBY DIGITAL Description Connects to your VHF/UHF antenna. VHF/UHF is the digital TV antenna input. Connects to your cable source. Connects to the S VIDEO OUT jack of your VCR or other S VIDEO-equipped video component. Provides better picture quality than the VHF/UHF jacks or the Video IN jack. Connect to the audio and video OUT jacks on your VCR or other video component. A 6th video input (VIDEO 2) is located on the front panel of the projection TV. The Audio and Video IN jacks provide better picture quality than the VHF/UHF IN jack. Connect to the audio and video IN jacks on your VCR or other video component. The output signal is determined by the SELECT OUT setting in the Setup menu (see page 65). Connect to your DVD player's or digital set-top box's component video (Y, PB, PR) and audio (L/R) jacks. Allows the projection TV to receive (IN) and send (OUT) remote control signals to other Sony infrared-controlled audio or video components. Connect to the optical audio input of an audio component that is Dolby Digital and PCM compatible. 15