Sony KDP-57XBR2 Primary User Manual (Large File - 14.16 MB) - Page 45
Setting Up the Projection TV Automatically
View all Sony KDP-57XBR2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Setting Up the Projection TV Setting Up the Projection TV Automatically z The initial setup screens appear only after turning on the projection TV the first time, or after selecting Factory Reset in the Setup menu (page 66). If you need to set the clock at a later time, press the TIMER button on the remote control (see page 49). You can also run Auto Program at any time from the Channel Setup menu (see page 58). The first time you turn on the projection TV, a series of screens guide you through the initial setup of the projection TV. During this setup, you are prompted to set the clock and start Auto Program, which searches for and stores a list of analog and digital channels you are receiving for VHF/UHF and CABLE inputs. ✍ Be sure to complete all connections before turning on the projection TV the first time. 1 Press POWER to turn on the projection TV and display the Welcome screen. z You can run the demonstration again by selecting Demo from the Setup menu (see pages 64 to 66). 2 Press to continue Setup. The set clock screen appears. 3 Move the joystick V and v to set the current day and time (hour, minute, and AM/PM). Press or move the joystick b to confirm each setting and move to the next setting. Move the joystick B to go back to the previous setting. 4 After you've set the clock, move the joystick b to highlight Next and press to continue Setup. The Auto Program screen appears. 5 To start Auto Program, press to select Auto Program. The projection TV automatically creates a channel list of analog and digital channels. (This may take a few minutes.) 6 When the channel list is complete, a Congratulations screen appears. To see a short demonstration of the features of the projection TV, press to select Demo. A self-running introduction to the features of the projection TV begins. To exit the demo at any time, press any button on the remote control (or front panel). To skip the demo and exit Setup, move the joystick b to highlight Done and press . 35