Sony KF-50WE620 Operating Instructions (Large File - 11.3 MB) - Page 77

Other Information Other Information Programming the Remote Control The remote control is preset to operate Sony brand video equipment. Sony Equipment DVD/VCR SAT/CABLE Programmable Code Number 601 (Sony Dream System) 801 (Sony Satellite Receiver) If you have video equipment other than Sony brand that you want to control with the LCD projection TV's remote control, use the following procedure to program the remote control. ✍ The equipment must have infrared (IR) remote capability in order to be used with the remote control. From the "Manufacturer's Codes" listed on page 78, select the three-digit code number for the manufacture's code of your equipment. If more than one code number is listed, try entering them one by one until you come to the correct code for your equipment. Use the code number to complete the following procedure. 1 Press the DVD/VCR (FUNCTION) and RESET buttons simultaneously, or press the SAT/CABLE (FUNCTION) and RESET buttons simultaneously. The DVD/VCR and SAT/CABLE buttons flash. 2 Press the function button you want to program. To program a cable box or a satellite receiver Press SAT/CABLE (FUNCTION). To program video equipment Press DVD/VCR (FUNCTION). 3 Enter the three-digit manufacture's code number using the 0 - 9 buttons. 4 Press ENT (enter). ✍ If no code number is input within 10 seconds, or an invalid or incorrect code number is input, the remote control automatically goes back to the previous setting. 5 To check if the code number works, aim the TV's remote control at the equipment and press DVD/VCR and/or SAT/CABLE (POWER) that corresponds with that equipment. If it responds, the programming is completed. If not, try using the other codes listed for that manufacturer. ✍ In some cases, you may not be able to operate your equipment with the supplied remote control. In such cases, use the equipment's own remote control unit. 77