Sony KF-60WE610 Operating Instructions - Page 86

Other Information Programming the Remote Control The remote control is preset to operate Sony brand video equipment. Function VCR/DVD SAT/CABLE Equipment Sony VCR Sony DSS tuner Programmable Code Number 301 801 VCR/ MUTING DVD SAT/ CABLE POWER MODE PICTURE WIDE DISPLAY JUMP FAVORITES ENT MENU VCR/DVD SAT/ CABLE TV FUNCTION TV/VIDEO If you have video equipment that you want to control with the LCD projection TV's remote control, use the following procedures to program the remote control. ✍ The equipment must have infrared (IR) remote capability in order to be used with the remote control. From the "Manufacturer's Codes" listed on page 87, select the three-digit code number for the manufacturer's code for your component. If more than one code number is listed, start with the number listed first. Use the code number to complete the following procedure. 1 Press CODE SET. 2 Press the desired FUNCTION button. 3 Input the three-digit manufacture's code number. 4 Press ENT. ✍ When no code number is input for 30 seconds or invalid or incorrect numbers are input, the remote control is reset to the normal TV remote control mode. FREEZE /TV/SAT ANT VOL GUIDE CH CODE SET RESET SLEEP MTS/SAP TV RM-Y913 Tips ❑ If more than one code number is listed, try entering them one by one until you come to the correct code for your component. ❑ If you enter a new code number, the code number you previously entered at that setting is erased. ❑ In some rare cases, you may not be able to operate your component with the Sony remote control. In this case, use the component's own remote control unit. 86