Sony KP-46C36 Operating Instructions - Page 17

4 Press V, B, v, or b to move the cursor (z) to the symbol showing the line you want to adjust, and press . CONVERGENCE +RED +BLUE MENU Us e RETURN E x i t MENU +RED : Red vertical and horizontal line (left/right/up/ down adjustment) +BLUE : Blue vertical and horizontal line (left/right/up/ down adjustment) 5 Press V, B, v, or b to move the line until it converges with the center green line, and press . R CONVERGENCE G +RED B +BLUE MENU B Us e G+R RETURN E x i t MENU To move Up Down Right Left Press V v b B 6 Repeat steps 4 and 5 to adjust the other lines until all three lines converge and are seen as a white cross. 7 Press MENU to return to the original screen. Setting cable TV on or off If you have connected the projection TV to a cable TV system, set CABLE to ON (the factory setting). If not, set CABLE to OFF. You do not have to do this procedure if you perform AUTO SET UP (page 14). Do this procedure only when you want to set it manually. 1 Press MENU. 2 Press V or v to select , and press . 3 Set CABLE to ON or OFF: (1) Press V or v to move the cursor (z) to CABLE, and press . (2) Press V or v to select ON or OFF, and press . SET UP CHANNEL ERASE/ADD CHANNEL CAPTION CHANNEL BLOCK FAVORITE CHANNEL CABLE : OFF AUTO PROGRAM VIDEO LABEL LANGUAGE : ENGLISH CC CONVERGENCE MENU Use Exit MENU EN 4 Press MENU to return to the original screen. Note • If CABLE appears in gray, the projection TV is set to a video input and you cannot select CABLE. Press TV (black button) so that a channel number appears. Getting Started 17-EN