Sony KP-46WT500 Operating Instructions - Page 23
Connecting a Satellite Receiver
View all Sony KP-46WT500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installing and Connecting the Projection TV 01COV.book Page 23 Tuesday, July 30, 2002 3:46 PM Installing and Connecting the Projection TV Connecting a Satellite Receiver Disconnect all power sources before making any connections. 1 Connect the satellite antenna cable to the satellite receiver's SATELLITE IN jack. 2 Using AUDIO and S VIDEO cables, connect the satellite receiver's AUDIO and S VIDEO OUT jacks to the projection TV's AUDIO and S VIDEO IN jacks. 3 Connect a coaxial cable from your cable or antenna to the projection TV's VHF/UHF jack. ✍ If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable. Rear of projection TV Coaxial cable S VIDEO VIDEO (yellow) AUDIO-L (white) AUDIO-R (red) Satellite receiver VMC-810S/820S (not supplied) YC-15V/30V (not supplied) Satellite antenna cable 23 Model name1[KP-46WT500] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500] [4-088-847-12]