Sony KP-46WT500 Operating Instructions - Page 68
Other Information - green
View all Sony KP-46WT500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
01COV.book Page 68 Tuesday, July 30, 2002 3:46 PM Other Information Programming the Remote Control The remote control is preset to operate Sony brand video equipment. Sony Equipment Beta, ED Beta VCRs 8 mm VCR VHS VCR DVD Player Switch Position on Remote Control AV1 AV2 AV3 DVD Programmable Code Number 303 302 301 751 If you have video equipment other than Sony brand that you want to control with the projection TV's remote control, use the following procedures to program the remote control. ✍ The equipment must have infrared (IR) remote capability in order to be used with the remote control. From the "Manufacturer's Codes" listed on page 70, select the three-digit code number for the manufacturer's code for your component. If more than one code number is listed, start with the number listed first. Use the code number to complete the following procedure. To program a cable box or a satellite receiver 1 Open the panel of the remote control. 2 Press CODE SET inside the panel. 3 Close the panel and press SAT/CABLE (FUNCTON). 4 Enter the three-digit manufacturer's code number using the 0-9 buttons. 5 Press ENTER. 6 To check if the code number works, aim the projection TV's remote control at the component and press the green POWER button that corresponds with that component. If it responds, the programming is completed. If not, try using the other codes listed for that manufacturer. 68 Model name1[KP-46WT500] Model name2[KP-51WS500] Model name3[KP-57WS500] Model name4[KP-65WS500] [4-088-847-12]