Sony KP-65XBR10W Operating Instructions - Page 28

Setting Up the Projection TV Automatically The AUTO SET UP feature will allow you to set the on-screen language and set all receivable channels. The AUTO SET UP feature does not apply for installations that use a cable box for all channel selection. You can also set up the projection TV manually. (see "Using the CHANNEL SET UP Menu" on page 41) Notes: • Perform this function during the day, with the antenna and/or cable properly connected, to ensure that all available channels will be broadcasting and receivable. • Before you perform AUTO SET UP again, make sure that the input from ANT (not AUX) is selected by pressing ANT until "AUX" does not appear next to the channel number. • When you perform AUTO PROGRAM, your CHANNEL FIX and ON/OFF TIMER settings will be erased. • When you perform AUTO SET UP, all the settings in the VIDEO and AUDIO menus are reset to the factory settings. Using the buttons on the front panel and inside the drop-down panel on the projection TV: POWER TIMER/ STAND BY STEREO SET UP FLASH FOCUS VOLUME CHANNEL ++ - TV/VIDEO - 1 Press POWER to turn on the projection TV. POWER 2 Press SET UP inside the drop-down panel. The AUTO SET UP screen appears. SET UP ENGLISH : ESPAÑOL : AUTO SET UP : [ CH + ] [ CH - ] [ VOL - ] First Please connect the antenna. Press [ SET UP ] to exit. 3 Press CHANNEL + to select English, CHANNEL - to select Spanish. The screen will change to reflect your choice. CHANNEL ENGLISH : ESPAÑOL : AUTO SET UP : [ CH + ] [ CH - ] [ VOL - ] First Please connect the antenna. Press [ SET UP ] to exit. 4 Press VOLUME - to continue. VOLUME CONTINUE TO AUTO PROGRAM? YES: [CH +] NO : [CH -] 5 Press CHANNEL + to preset channels automatically. CHANNEL AUTO PROGRAM "AUTO PROGRAM" appears and the projection TV starts scanning and presetting channels automatically. While scanning, the received channel will be displayed on the sub screen. When all the receivable channels are stored, the lowest numbered channel will be displayed. 24