Sony KP-65XBR10W Operating Instructions - Page 43

Adjusting Your SET UP (menus) 3 Move the joystick up or down to select the speaker for volume adjustment and press . ;PRO-LOGIC CENTER REAR BALANCE TEST TONE : OFF Move Select Exit MENU CENTER: Select to adjust the level of the center speaker. (not available for SRS 3D MONO) REAR: Select to adjust the level of the rear speakers. (not available for ;3 STEREO) BALANCE: Select to adjust the balance between the right and left speakers. 4 Move the joystick up, down, left or right to adjust the volume level and press . 5 Use the joystick to select other speakers and to adjust the volume levels. Adjusting the speaker volume using the test tone The TEST TONE feature makes it easier to adjust the volume level. You can use this feature for ;PRO LOGIC and ;3 STEREO modes only. 1 With the SURROUND LEVEL window open, move the joystick up or down to select TEST TONE and press . ;PRO-LOGIC CENTER REAR BALANCE TEST TONE : ON OFF Move Select Exit MENU 2 Move the joystick up or down to select ON. A test tone will be output from each speaker in sequence: Front left t Center t Front right t Rear To turn off the test tone, select OFF. 3 Follow steps 2 through 4 in "Adjusting the speaker volume." Note: You can adjust the volume using the test tone independent of the projection TV's operation. Using the TIMER Menu TIMER DAYLIGHT SAVING: NO CURRENT TIME ON / OFF TIMER --:--AM Move Select Exit MENU After setting the clock you can use the timer to turn the projection TV on and off. For detailed information on using the remote control to modify menu settings, refer to "Learning Menu Selection" on page 35. To select the TIMER Display , Highlight MENU menu: , Select Tip z Set daylight saving time before setting the clock. Any loss of power will cause these settings to be erased. (continued) 39