Sony KV-27FA210 Operating Instructions (primary manual) - Page 35

Using the Menus Using the Audio Menu To access the Audio menu, use the following steps: Video Audio Channel Parent Timer Setup Basic To Display To Highlight To Select Press f to highlight an option; then press . Treble Bass Balance Steady Sound: Off Effect: TruSurround MTS: Stereo Speaker: On Audio Out: Variable Adjust High frequency sound Move: Select: End: Treble Bass Balance Steady Sound Stabilizes volume Effect ✍ Press Press G to decrease the higher pitched sounds. Press g to increase the higher pitched sounds. Press G to decrease the lower pitched sounds. Press g to increase the lower pitched sounds. Press G to emphasize the left speaker. Press g to emphasize the right speaker. Use the F or f buttons to highlight one of the following options, then press to select it. On: Select to stabilize the volume when changing channels. Off: Select to turn Steady Sound off. Use the F or f buttons to highlight one of the following options, then press to select it. Simulated: Simulates theater quality sound for mono programs. WOW: Provides a dramatic presence with a full, deep bass sound. When WOW is enabled, BBE is activated to further enhance the audio performance. TruSurround: Produces a dynamic three-dimensional sound for stereo audio signals. Off: Provides normal stereo or mono reception. to directly select Effect settings (Simulated, WOW, TruSurround, Off). MTS Multi-Channel TV Sound ✍ Press Use the F or f buttons to highlight one of the following options, then press to select it. Stereo: Select when viewing a broadcast in stereo. Auto SAP: Select to have the TV automatically switch to a Second Audio Program (SAP) when a signal is received. Mono: Select to reduce noise in areas of poor reception. to directly select MTS settings (Stereo, Auto SAP, Mono). ✍ If your TV is set to Auto SAP, some programs may be muted or distorted. If your TV does not output sound, change your Audio MTS setting to Stereo or Mono. (continued) 27