Sony LBT-D110CD Operating Instuctions - Page 25

correctly.

Page 25 highlights

CD player Symptom The disc tray does not close. Play does not start. Plait does not begin from the first selection. Cause The disc is not placed correctly. Dirty disc. The disc is inserted upside down. II is engaged. Moisture condensation. The unit is in the program or shuffle mode Remedy Placethe disc correctly on the disc tray. Clean the disc. Insert the disc with the printed side up. Press the►orII button again to release it. Leave the unit turned on for approximately one hour. Press the CONTINUE button. Remote commander Symptom The remote commander does not operate the unit. Operation is not possible. Cause The batteries are run down. The remote commander is not pointed at the remote sensor. There is an obstacle between the remote commander and the unit. The remote commander is too far from the unit. The internal control program may not be functioning. Remedy Replace both batteries. Point the remote commander at the sensor. Remove the obstacle. Move closer. Turn off the power and turn it again. 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

CD
player
Symptom
The
disc
tray
does
not
close.
Cause
The
disc
is
not
placed
correctly.
Remedy
Place
the
disc
correctly
on
the
disc
tray.
Play
does
not
start.
Dirty
disc.
Clean
the
disc.
The
disc
is
inserted
upside
down.
II
is
engaged.
Insert
the
disc
with
the
printed
side
up.
Press
the
or
II
button
again
to
release
it.
Moisture
condensation.
Leave
the
unit
turned
on
for
approximately
one
hour.
Plait
does
not
begin
from
the
first
selection.
The
unit
is
in
the
program
or
shuffle
mode
Press
the
CONTINUE
button.
Remote
commander
Symptom
The
remote
commander
does
not
operate
the
unit.
Cause
The
batteries
are
run
down.
Remedy
Replace
both
batteries.
The
remote
commander
is
not
pointed
at
the
remote
sensor.
Point
the
remote
commander
at
the
sensor.
There
is
an
obstacle
between
the
remote
commander
and
the
unit.
Remove
the
obstacle.
The
remote
commander
is
too
far
from
the
unit.
Move
closer.
Operation
is
not
possible.
The
internal
control
program
may
not
be
functioning.
Turn
off
the
power
and
turn
it
again.
25