Sony LBT-D990 Operating Instructions - Page 40
Specifications
View all Sony LBT-D990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Specifications For the U.S. model AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 8 ohm loads, both channels driven, from 70 - 20,000 Hz; rated 100 watts per channel minimum RMS power, with no more than 0.9% total harmonic distortion from 250␣ milliwatts to rated output. Amplifier section Continuous RMS power output (LBT-D290/D590/D690/D990/G3300) Canadian model: 100 + 100 watts (8 ohms at 1 kHz, 5%) (LBT-XB3/XB3K/XB30) 70 + 70 watts (6 ohms at 1 kHz, 10% THD) (LBT-XB4/XB4K) 80 + 80 watts (5 ohms at 1 kHz, 10% THD) (LBT-XB600/XB6/XB6K) 100 + 100 watts (8 ohms at 1 kHz, 10% THD) Peak music power output (LBT-XB3/XB3K/XB30) 1,000 watts (LBT-XB4/XB4K) 1,200 watts (LBT-XB600/XB6/XB6K) 1,400 watts Inputs PHONO IN (phono jacks): sensitivity 3 mV, impedance 47 kilohms VIDEO (AUDIO) IN (phono jacks): sensitivity 250 mV, impedance 47 kilohms MIX MIC (phone jack): sensitivity 1 mV, impedance 10 kilohms Outputs PHONES (stereo phone jack): accepts headphones of 8 ohms or more SPEAKER: (LBT-D290/D590/D690/D990/G3300/XB600/XB6/ XB6K) accepts impedance of 8 to 16 ohms. (LBT-XB3/XB3K/XB30) accepts impedance of 6 to 16 ohms. (LBT-XB4/XB4K) accepts impedance of 5 to 16 ohms. SURROUND SPEAKER (LBT-D590/D690/D990/XB600/XB6/XB6K only) accepts impedance of 16 ohms 40 CD player section System Laser Laser output Wavelength Frequency response Signal-to-noise ratio Dynamic range Compact disc and digital audio system Semiconductor laser (λ = 780 nm) Emission duration: continuous Max. 44.6 µF* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. 780 - 790 nm 2 Hz - 20 kHz (±0.5 dB) More than 90 dB More than 90 dB Tape player section Recording system 4-track 2-channel stereo Frequency response (DOLBY NR OFF) 60 - 13,000 Hz ( ±3 dB), using a Sony TYPE I cassette 60 - 14,000 Hz ( ±3 dB), using a Sony TYPE II cassette Wow and flutter ±0.15% W. Peak (IEC) 0.1% W. RMS (NAB) ±0.2% W. Peak (DIN) Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range North American model: 87.5 - 108.0 MHz Other models: Antenna (100␣ kHz step) 87.5 - 108.0 MHz (50 kHz step) FM wire antenna Antenna terminals 75 ohm unbalanced Intermediate frequency 10.7 MHz AM tuner section Tuning range North American model: 530 - 1,710 kHz (with the tuning interval set at 10 kHz) 531 - 1,710 kHz (with the tuning interval Other models: set at 9 kHz) 531 - 1,602 kHz (with the tuning interval set at 9 kHz) 530 - 1,710 kHz (with the tuning interval set at 10 kHz) Antenna AM loop antenna, Intermediate frequency External antenna terminals 450 kHz