Sony LBT-D990 Operating Instructions - Page 5
Connect the FM/AM antennas.
View all Sony LBT-D990 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
2 Connect the FM/AM antennas. Set up the AM loop antenna, then connect it. Extend the FM wire antenna horizontally. AM loop antenna FM75 AM Inserting two size AA (R6) batteries into the remote 3 Set VOLTAGE SELECTOR to the position of your local power line voltage (except for North American, Malaysian, Mexican, and Australian models). VOLTAGE SELECTOR 110-120V 220-240V 4 Connect the power cord to a wall outlet. The demonstration appears in the display. If the plug on this unit does not fit your wall outlet, detach the supplied adapter from the plug (except for North and South American countries, Australia, and Malaysia). 5 Deactivate the demonstration mode by pressing DISPLAY/DEMO while the system is off. Tips • With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. • When you set the time, the demonstration is deactivated. To activate the demonstration again, press DISPLAY/DEMO while the system is off. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. When carrying this system Do the following to protect the CD mechanism. 1 Press FUNCTION repeatedly until "CD" appears in the display. 2 Hold down PLAY MODE and press POWER (I/u for LBT-D990/XB30) to turn off the system. 5