Sony LBT-LX90AV Operating Instructions - Page 8
Adjusting the speaker, volume, Press PRO LOGIC.
View all Sony LBT-LX90AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Step 2: Setting up the speakers (continued) Adjusting the speaker volume To enjoy Dolby Pro Logic Surround sound, adjust the volume of each speaker using the test tone that the system provides. ?/1 (Power) 1 VOLUME 1 Press PRO LOGIC. The button lights up. 2 Press T. TONE on the remote. The test tone is heard from the speakers in the following order. Adjust the volume of the test tone. t LEFT t CENTER REAR T RIGHT T 3 From your listening position, press CENTER LEVEL +/- and REAR LEVEL +/- on the remote to adjust the volume levels. The volume levels from each speaker should be the same. 4 Press T. TONE when you are done adjusting. The test tone is turned off. Tip If you turn VOLUME (or press VOL +/- on the remote), all the speaker volumes change. Note The test tone feature works only for Dolby Pro Logic Surround sound. 3 1 2,4 VOL +/- 8