Sony LSPX-P1 Reference Guide - Page 1

4-581-618-11(1) Portable Ultra Short Throw Projector Location of controls  Portable Ultra Short Throw Projector Reference Guide LSPX-P1 ©2016 Sony Corporation Printed in Korea  Ventilation holes (intake/exhaust)  Projection window (Laser aperture)  Power indicator  Power button  DC IN 19.5V jack  Wireless Unit  Distance sensor  RESET button  Charge indicator  Power jack for the stand (not supplied) Manuals supplied Startup Guide Read this manual first. The initial preparation, such as charging and connecting a smartphone, is described. Reference Guide (this document) Safety precautions and specifications. Help Guide (Web operating instructions) The Help Guide describes the features of the unit and how to use in detail. You can view the Help Guide on a smartphone or computer. http://rd1.sony.net/help/projector/lspxp1/ en-us/ Owner's Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product. Model No. LSPX-P1 (Projector) Serial No Model No. LSPX-PT1 (Wireless Unit) Serial No  HDMI IN connector  HDMI OUT (pass-through) connector  IR BLASTER connector  DC IN 5V jack  PAIRING button WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. IMPORTANT SAFETY INSTRUCTIONS -SAVE THESE INSTRUCTIONS DANGER TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS If the shape of the plug does not fit the power outlet, use an attachment plug adaptor of the proper configuration for the power outlet. CAUTION Observe the following cautions, as there may be a risk of heat generation, fire or explosion. * Lithium-ion battery is built into the product. • Charge the product by the designated charging method. • Do not place the product in or near fire, or put the product in a microwave. • Do not leave the product in a car in hot weather. • Do not store or use the product in a hot and humid place such as in a sauna bath. • Do not disassemble, crush or pierce the product. • Do not expose the product to excessive shock such as dropping from a high place. • Do not expose the product to high temperatures above 60 °C (140 °F). • Keep the product dry. Dispose of the product appropriately. Charge the product by the designated charging method in the instruction manual. • Use the nearby wall outlet (wall socket) when using this unit. If any trouble occurs while this unit is in use, unplug it from the wall outlet (wall socket) to disconnect the power. • For models with CHARGE lamp Even when the CHARGE lamp is off, the power is not disconnected. For supplied accessories This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure. Frequency Tolerance: ±15 ppm This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated keeping the radiator at least 20cm or more away from person's body. If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY (7669) The number below is for the FCC related matters only. Regulatory Information Declaration of Conformity Trade Name: SONY Model No.: LSPX-P1 Responsible Party: Sony Electronics Inc. Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with Part15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment must not be co-located or operated in conjunction with any other antenna or transmitter. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules. Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This Projector is classified as a CLASS 2 LASER PRODUCT. This CLASS 2 LASER PRODUCT label is located near the projection window of the Projector. WAVELENGTH: 430-460 nm, 505-530 nm, 625-650 nm Energy < 5 mJ Pulse Duration: Red 2.67 ms / Green 3.5 ms or 1.75 ms / Blue 3.5 ms, 60 Hz Beam divergence (Laser radiation area) 70° 144° 27.5° Precautions For your safety • Do not let water or foreign objects get into the unit. It may cause a fire or electric shock. If water or foreign objects have gotten into the unit, turn it off immediately, and disconnect the power cord and connection cables. • Do not disassemble or modify the unit. It may cause a malfunction, fire or electric shock. • If there is a possibility of lightning strike, do not use the unit. A lightning strike may cause an electric shock. If lightning is likely, unplug the unit to prevent a fire, electric shock and malfunction. On safety • Wireless functions are incorporated into this unit. Radio waves may affect the operation of other devices. Do not use this device in the following locations. - On an airplane. - Near automatically-controlled equipment, such as automatic doors or fire alarms. If other equipment experiences problems such as interference while the unit is being used, immediately stop using the unit. • Do not continue viewing the projected screen for a long time. Continuously viewing the projected screen for a long time may cause eye strain. If you feel any discomfort or pain, immediately stop using the unit and have a rest. If the discomfort or pain persists after taking a rest, consult a doctor. • Do not project onto a glossy surface. The light may be reflected into your eyes and may adversely affect them. • Keep the unit away from children. If a cable becomes wrapped around the neck or similar misuse, it may cause an accident or injury. On handling • If the unit is not to be used for a long time, unplug it. • Do not drop, hit, compress, or put a heavy object on the unit. • The operating temperature range of the unit is 5 °C to 35 °C (41 °F to 95 °F). If the unit is used in an extremely cold or hot place outside the operating temperature range, it may cause a malfunction. • The wireless function of the unit is designed for use in the U.S.A. only. Each country/region has its own regulations for radio wave use, therefore if you use the wireless function of the unit abroad, you may be penalized. • Do not place the unit where there is excessive oily smoke, steam, moisture or dust. It may cause a fire or electric shock. • Do not install the unit in a dangerously unsuitable location. The unit may fall causing an injury. • Do not subject the unit to a strong impact. If you apply a strong force to the unit, such as putting a heavy object on it, drop it, or step on it, it may cause injuries or a malfunction. Although the projection window is made of tempered glass, if it is strongly pushed or struck, it may break causing injuries. • Take care not to drop the unit when moving it. If the unit falls, it may break or cause injuries. LSPX-P1 4-581-618-11(1)