Sony LinkBuds S Help Guide - Page 31

Help Guide Wireless Noise Canceling Stereo Headset LinkBuds S Turning on the headset When the headset is set into the charging case 1 Remove the headset from the charging case. The headset turns on automatically. When you remove only one unit from the charging case, only the removed unit turns on. When the headset is not set into the charging case When the headset is not worn in your ears for about 15 minutes after being removed from the charging case, the headset turns off automatically. In this case, turn the headset on by tapping the touch sensor of the headset or by putting the headset into your ears. The headset will also turn on when it is set into the charging case and then removed from the charging case. By using the "Sony | Headphones Connect" app, you can change the setting of the headset so that it will not be turned off automatically. When the headset is turned on When both headset units are removed from the charging case, the connection between the left and right units of the headset is established. When you use the headset for the first time after purchase or just after initializing the headset, the headset goes into Bluetooth pairing mode automatically when you put the headset units into both ears. When you use the headset for the first time after purchase or just after initializing the headset, the noise canceling function is turned on automatically when you put the headset units into your ears. If the noise canceling settings were changed previously, the settings are retained. Related Topic Using only one unit of the headset Turning off the headset What you can do with the "Sony | Headphones Connect" app 5-035-792-11(1) Copyright 2022 Sony Corporation 31