Sony MDR-DS8000 Operating Instructions - Page 15
Plugging into the wall outlet, Setting the input level
View all Sony MDR-DS8000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Setting the input level If the volume is low using analogue input, set the ATT (attenuator) switch to "0dB". 0dB ATT -8dB Setting 0dB -8dB Connected components TV, portable components, and other components with a low output level Other components (initial settings) Notes • Be sure to lower the volume before setting the ATT switch. • If audio input to the LINE INPUT jacks is distorted (sometimes, noise can be heard at the same time.), set the ATT switch to "-8dB". Plugging into the wall outlet Processor AC power adaptor To the wall outlet To DC IN jack Notes • Be sure to use the supplied AC power adaptor. Using AC adaptors with different plug polarity or other characteristics can cause product failure. Unified polarity plug • Be sure to always use the supplied AC power adaptor. Even AC power adaptors having the same voltage and plug polarity can damage this product due to the current capacity or other factors. Connection 15GB