Sony MEX-BT2900 Operating Instructions - Page 17

Bluetooth (Handsfree calling and Music streaming) Bluetooth operations To use the Bluetooth function, the following procedure is necessary. 1 Pairing When connecting Bluetooth devices for the first time, mutual registration is required. This is called "pairing." Registration is required only for the first time, as this unit and the other devices will recognize each other automatically thereafter. You can pair up to 9 devices. (Depending on the device, you may need to input a passkey for each connection.) 2 Connection To use the device after pairing is made, start the connection. Sometimes pairing allows for connection automatically. 3 Handsfree calling and Music streaming You can talk handsfree and listen to music when the connection is made. Support site http://esupport.sony.com http://www.sony.com/mobileAV 3 Set the Bluetooth device to search for this unit. A list of detected devices appears in the display of the device to be connected. This unit is displayed as "Sony Automotive" on the device to be connected. DR-BT30Q Sony Automotive XXXXXXX 4 If Passkey* input is required on the display of the device to be connected, input "0000." XXXX Input passkey. "0000" This unit and the Bluetooth device memorize each other's information, and when pairing is made, the unit is ready for connection to the device. If the device supports Bluetooth version 2.1, passkey input is not required. Pairing First, register (pair) a Bluetooth device (cellular phone, etc.) with this unit. You can pair up to 9 devices. Once pairing is established, there is no need for pairing again. 1 Place the Bluetooth device within 1 m (3 ft) of this unit. 2 Press and hold (BT) until " " flashes (more than 2 seconds). The unit enters pairing standby mode. flashing " " flashes and then stays lit after pairing is complete. 5 Set the Bluetooth device to connect to this unit. " " or " " appears when the connection is made. * Passkey may be called "passcode," "PIN code," "PIN number" or "Password," etc., depending on the device. Notes • While connecting to a Bluetooth device, this unit cannot be detected from another device. To enable detection, enter the pairing mode and search for this unit from another device. • It may take time to search or connect. • Depending on the device, the confirmation display of the connection appears before inputting the passkey. • The time limit for inputting the passkey differs depending on the device. • This unit cannot be connected to a device that supports only HSP (Head Set Profile). 17