Sony MEX-BT2900 Operating Instructions - Page 18

About Bluetooth icons The following icons are used by this unit. Lit: Bluetooth signal is on. Flashing: Pairing is in standby mode. None: Bluetooth signal is off. Lit: Flashing: None: Connected to a cellular phone. Connection is in progress. No cellular phone is connected for handsfree calling. Lit: Connected to a device. Flashing: Connection is in progress. None: No device is connected for music streaming. Lit: Flashing: None: Some unread SMS messages exist. A new SMS message has been received. No unread SMS messages exist. Signal strength status of connected cellular phone.* Remaining battery status of connected cellular phone.* * Turns off without handsfree connection. Differs in the case of a cellular phone. Connection If pairing has already been achieved, start operation from here. To switch the Bluetooth signal output of this unit to on To use the Bluetooth function, switch the Bluetooth signal output of this unit to on. 1 Press (BT). Bluetooth signal is activated. If you select the Bluetooth Phone source after the connection is made, the network name and the connected cellular phone name appear in the display. To change display items, press (DSPL). Connecting the last-connected cellular phone from this unit 1 Be sure the cellular phone is switched to Bluetooth signal on. 2 Press (SOURCE/OFF) repeatedly until "BT PHONE" appears. 3 Press (handsfree). " " flashes while the connection is being made. " " stays lit when the connection is made. Notes • Some cellular phones require permission to access their phonebook data during handsfree connection to this unit. Obtain permission via the cellular phone. • While streaming Bluetooth audio, you cannot connect from this unit to the cellular phone. Connect from the cellular phone to this unit instead. A connecting noise may be heard over playback sound. Tips • With Bluetooth signal on: when the ignition is turned to on, this unit reconnects automatically to the lastconnected cellular phone. But automatic connection also depends on the cellular phone's specification. If automatic connection is not made, connect manually. • You can also select the Bluetooth Phone source by press (CALL). Connecting an audio device 1 Be sure that both this unit and the audio device are switched to Bluetooth signal on. 2 Connect to this unit using the audio device. " " appears when the connection is made. Connecting a cellular phone 1 Be sure that both this unit and the cellular phone are switched to Bluetooth signal on. 2 Connect to this unit using the cellular phone. 18 " "appears when the connection is made. Connecting the last-connected audio device from this unit 1 Be sure the audio device is switched to Bluetooth signal on. 2 Press (SOURCE/OFF) repeatedly until "BT AUDIO" appears.