Sony MEX-BT39UW Operating Instructions - Page 21
Searching a track by listening to track passages - ZAPPIN™
View all Sony MEX-BT39UW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Searching a track by listening to track passages - ZAPPIN™ While playing short track passages in a CD or USB device in sequence, you can search for a track you want to listen to. ZAPPIN mode is suitable for searching for a track in shuffle or shuffle repeat mode. 1 Press (5) (MIC/ZAP) during playback. After "ZAPPIN" appears in the display, playback starts from a passage of the next track. The passage is played for the set time, then a click sounds and the next passage starts. Track (5) pressed. The part of each track to play in ZAPPIN mode. 2 Press the select button or (5) (MIC/ ZAP) when a track you want to listen to is played. The track that you select returns to normal play mode from the beginning. To search a track by ZAPPIN mode again, repeat steps 1 and 2. Tips • You can select the playback time from about 6 seconds/15 seconds/30 seconds (page 30). You cannot select the passage of the track to play. • Press (SEEK) +/- or (3)/(4) (ALBUM -/+) in ZAPPIN mode to skip a track or album. • Pressing (BACK) also confirms a track to playback. Bluetooth (Handsfree calling and Music streaming) Bluetooth operations To use the Bluetooth function, the following procedure is necessary. 1 Pairing When connecting Bluetooth devices for the first time, mutual registration is required. This is called "pairing." Registration is required only for the first time, as this unit and the other devices will recognize each other automatically thereafter. You can pair up to 9 devices. (Depending on the device, you may need to input a passkey for each connection.) 2 Connection To use the device after pairing is made, start the connection. Sometimes pairing allows for connection automatically. 3 Handsfree calling/Music streaming You can talk handsfree and listen to music when the connection is made. Support site http://esupport.sony.com http://www.sony.com/mobileAV Pairing First, register (pair) a Bluetooth device (cellular phone, etc.) with this unit. You can pair up to 9 devices. Once pairing is established, there is no need for pairing again. 1 Place the Bluetooth device within 1 m (3 ft) of this unit. 2 Press and hold (BT) until " " flashes (more than 2 seconds). The unit enters pairing standby mode. flashing continue to next page t 21