Sony MEX-BT39UW Operating Instructions - Page 25

Mic Gain adjustment You can adjust the volume for the other party. Press (5) to adjust the volume levels ("MICLOW," "MIC-MID," "MIC-HI"). Note Configurable during a call. EC/NC Mode (Echo Canceller/Noise Canceller Mode) You can reduce echo and noise. Press and hold (5)/ to select to "EC/NC-1" or "EC/NC-2." Note Configurable during a call. Call transfer In order to activate/deactivate the appropriate device (this unit/cellular phone), check the following. 1 Press (MODE) or use your cellular phone. For details on cellular phone operation, refer to your cellular phone manual. Note Depending on the cellular phone, handsfree connection may be cut off when call transfer is attempted. Your voice is recognized, and the call is made. Notes • Check that the unit and cellular phone are connected beforehand. • Store a voice tag on your cellular phone beforehand. • If you activate voice dialing with a cellular phone connected to this unit, this function may not always work in some cases. • Noises such as the engine running may interfere with sound recognition. In order to improve recognition, operate under conditions where noise is minimized. • Voice dialing may not work in some situations, depending on the effectiveness of the cellular phone's recognition function. For details, see the support site (page 21). Tips • Speak in the same way as you did when you stored the voice tag. • Store a voice tag while seated in the car, via this unit with "BT PHONE" source selected. SMS indicator While connecting a cellular phone to this unit, the SMS indicator informs you of any incoming or unread SMS messages. If you receive a new SMS message, the SMS indicator flashes. Preset dial Contacts (up to 6) in the phonebook of a cellular phone can be stored in the preset dial. 1 Press (SOURCE/OFF) repeatedly until "BT PHONE" appears. 2 Press and hold a number button ((1) to (6)) to select the preset number to store. "P (preset number) WAITING" appears. 3 Send the phonebook data by operating the cellular phone. The contact is stored in the selected preset number. If there are any unread SMS messages, the SMS indicator stays lit. Note Function of the SMS indicator may depend on the cellular phone. Voice dial activation You can activate voice dialing with a cellular phone connected to this unit by saying the voice tag stored on the cellular phone, then make a call. 1 Press (SOURCE/OFF) repeatedly until "BT PHONE" appears. 2 Press (handsfree). "VOICE DIAL" appears. 3 Say the voice tag stored on the cellular phone. 25