Sony MEX-DV1700U Operating Instructions - Page 51
SiriusXM tuner (U.S. models only), Adjusting the volume level, Selecting channels
View all Sony MEX-DV1700U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Adjusting the volume level Be sure to adjust the volume of each connected device before playback. 1 Turn down the volume on the unit. 2 Press repeatedly until "AUX" appears on the main unit. If two auxiliary devices are connected, select the device to adjust its volume by pressing 3 Start playback of the auxiliary device at a moderate volume. 4 Set your usual listening volume on the unit. 5 Press 6 Press / to select "AUX-LEVEL," then press 7 Press / to adjust the input level. The input level is adjustable in single steps, between -8 and +18. 8 Press The setting is complete. To hide the system setup display, press With the main unit Press instead of press and hold the control dial instead of pressing rotate the control dial instead of pressing /, press the control dial instead of SiriusXM tuner (U.S. models only) By connecting an optional SiriusXM tuner, you can use the features and functions of the SiriusXM satellite radio (Sirius and XM subscriptions sold separately). For more details on the services, visit the following web site: http://www.siriusxm.com/ Selecting channels 1 During playback, press enter the browse mode. (BROWSE) to 2 Rotate the control dial to select the desired channel, then press it. Selecting categories 1 During playback, press on the main unit to enter browse mode. 2 Rotate the control dial to select the desired category, then press it. Parental control The channels containing unsuitable contents for children are preset to block. To unblock the channel, enter the passcode. 1 On the system set up menu (page 48), rotate the control dial to select "PARENTAL," then press it. 2 Rotate the control dial to select "LOCK SEL," then press it. 3 Rotate the control dial to select "OFF," then press it. 4 On the passcode input display, enter the four-digit passcode, then press the control dial. The initial passcode is "0000." To change the passcode 1 On the system set up menu (page 48), rotate the control dial to select "PARENTAL," then press it. 2 Rotate the control dial to select "CODE EDIT," then press it. 3 On the current passcode input display, enter the current passcode, then press the control dial. The initial passcode is "0000." 4 On the new passcode input display, enter new 4-digit passcode, then press the control dial. Displaying the SiriusXM Radio ID 1 During playback, press (BROWSE) to enter the browse mode. 2 Rotate the control dial to select the channel "0," then press it. 51