Sony MEX-M100BT Operating Instructions - Page 29
SongPal operation, Pandora® operation, Error displays/Messages, to [BT AUDIO]. - output error
![]() |
View all Sony MEX-M100BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Some functions do not work. Check if the connecting device supports the functions in question. A call is answered unintentionally. The connecting phone is set to answer a call automatically. Pairing failed due to a timeout. Depending on the connecting device, the time limit for pairing may be short. Try completing the pairing within the time. BLUETOOTH function cannot operate. Turn off the unit by pressing OFF for more than 2 seconds, then turn the unit on again. No sound is output from the boat's speakers during handsfree call. If the sound is output from the cellular phone, set the cellular phone to output the sound from the boat's speakers. Siri Eyes Free is not activated. Perform the handsfree registration for an iPhone that supports Siri Eyes Free. Set the Siri function on the iPhone to on. Cancel the BLUETOOTH connection with the iPhone and the unit, and reconnect. SongPal operation Application name is mismatched with the actual application in "SongPal". Launch the application again from the "SongPal" application. While running the "SongPal" application via BLUETOOTH, the display automatically switches to [BT AUDIO]. The "SongPal" application or BLUETOOTH function has failed. Run the application again. The "SongPal" application is automatically disconnected when the display switches to [IPD]. The "SongPal" application on iPhone/iPod does not support iPod playback. Change the source of the unit to other than [IPD], then establish the "SongPal" connection (page 18). Pandora® operation Pandora® connection is not possible. Shut down the Pandora® application on the mobile device, and then launch it again. Error displays/Messages CD ERROR: The disc cannot be played. The disc will be ejected automatically. Clean or insert the disc correctly, or make sure the disc is not blank or defective. CD NO MUSIC: There is no playable file. The disc will be ejected automatically. Insert a disc containing playable files (page 25). CD PUSH EJT: The disc could not be ejected properly. Press (eject). HUB NO SUPRT: USB hubs are not supported. IPD STOP: iPod playback has finished. Operate your iPod/iPhone to start playback. OUTPUT ERROR: There may be an internal malfunction. Check the connection. If the error message still remains on in the display, consult your nearest Sony dealer. OVERLOAD: The USB device is overloaded. Disconnect the USB device, then press SRC to select another source. The USB device has a fault, or an unsupported device is connected. READ: Now reading information. Wait until reading is complete and playback starts automatically. This may take some time depending on the file organization. TEMP CAUTION: The thermal protector is activated. Reduce the volume. USB ERROR: The USB device cannot be played. Connect the USB device again. USB NO DEV: A USB device is not connected or recognized. Make sure the USB device or USB cable is securely connected. USB NO MUSIC: There is no playable file. Connect a USB device containing playable files (page 25). USB NO SUPRT: The USB device is not supported. For details on the compatibility of your USB device, visit the support site on the back cover. 29GB
![](/manual_guide/products/sony-mexm100bt-operating-instructions-17aa7ea/29.png)