Sony MEX-XB120BT Operating Instructions 1 - Page 32
Radio reception, CD playback, USB device playback, The audio file cannot be played.
View all Sony MEX-XB120BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Radio reception Stations cannot be received. The sound is hampered by noises. The connection is not correct. - If your car has built-in radio antenna (aerial) in the rear/side glass, connect an REM OUT lead (blue/white striped) or accessory power supply lead (red) to the power supply lead of a car's antenna (aerial) booster. - Check the connection of the car antenna (aerial). - If the auto antenna (aerial) will not extend, check the connection of the power antenna (aerial) control lead. Preset tuning is not possible. The broadcast signal is too weak. RDS PTY displays The current station is not an RDS station. RDS data has not been received. The station does not specify the program type. CD playback The disc does not play. Defective or dirty disc. The CD-R/CD-RW is not for audio use (page 27). MP3/WMA/AAC files cannot be played. The disc is incompatible with the MP3/ WMA/AAC format and version. For details on playable discs and formats, visit the support site on the back cover. MP3/WMA/AAC files take longer to play than others. The following discs take a longer time to start playback. - A disc recorded with a complicated tree structure. - A disc recorded in Multi Session. - A disc to which data can be added. The sound skips. Defective or dirty disc. USB device playback You cannot play items via a USB hub. This unit cannot recognize USB devices via a USB hub. A USB device takes longer to play. The USB device contains files with a complicated tree structure. The sound is intermittent. The sound may be intermittent at a high- bit-rate. DRM (Digital Rights Management) files may not be playable in some cases. The audio file cannot be played. USB devices formatted with file systems other than FAT16 or FAT32 are unsupported.* * This unit supports FAT16 and FAT32, but some USB device may not support all of these FAT. For details, refer to the operating instruction of each USB device or contact the manufacturer. Operations for skipping an album, skipping items (Jump mode), and searching a track by name (QuickBrowZer) cannot be performed. These operations cannot be performed when a USB device in Android mode or iPod is connected. - Set [USB MODE] to [MSC/MTP] (page 22). - Remove the iPod. The USB mode of the device is not set to the appropriate mode. - Make sure that the USB mode of the device is set to MSC/MTP mode. The sound cannot be output during playback in Android mode. While the unit is in Android mode, the sound outputs only from the Android smartphone. - Check the status of the audio playback application on the Android smartphone. - Playback may not perform properly depending on the Android smartphone. 32GB