Sony MEXBT2600 Operating Instructions - Page 16
Using optional equipment, Auxiliary audio equipment - demo mode
UPC - 027242722569
View all Sony MEXBT2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
RM (Rotary Commander) To change the operative direction of the rotary commander controls. - "NORM" (z): to use the rotary commander in the factory-set position. - "REV": when you mount the rotary commander on the right side of the steering column. AUX-A*1 (AUX Audio) To turn the AUX source display "AUX-A-ON" (z) or "AUX-A-OFF" (page 16). A.OFF (Auto Off) To shut off automatically after a desired time when the unit is turned off, - "A.OFF-NO" (z), "A.OFF-30S (Seconds)," "A.OFF-30M (Minutes)" or "A.OFF-60M (Minutes)." SUB/REAR*1 To switch the audio output. - "SUB-OUT" (z): to output to a subwoofer. - "REAR-OUT": to output to a power amplifier. DEMO (Demonstration) To set "DEMO-ON" (z) or "DEMO-OFF." DIM (Dimmer) To change the brightness of the display. - "DIM-ON": to dim the display. - "DIM-OFF" (z): to deactivate the dimmer. A.SCRL (Auto Scroll) To scroll long displayed item automatically when the disc/album/track is changed. - "A.SCRL-ON" (z): to scroll. - "A.SCRL-OFF": to not scroll. LOCAL (Local Seek Mode) - "LOCAL-ON" : to only tune into stations with stronger signals. - "LOCAL-OFF" (z): to tune normal reception. MONO*2 (Monaural Mode) To improve poor FM reception, select monaural reception mode. - "MONO-ON" : to hear stereo broadcast in monaural. - "MONO-OFF" (z): to hear stereo broadcast in stereo. LPF*3 (Low Pass Filter) To select the subwoofer cut-off frequency: "LPF OFF" (z), "LPF125Hz" or "LPF 78Hz." LOUD (Loudness) To allow you to listen clearly at low volume levels. - "LOUD-ON" : to reinforce bass and treble. - "LOUD-OFF" (z): to not reinforce bass and treble. BTM (page 10) BT INIT*1 (page 14) 16 *1 When the unit is turned off. *2 When FM is received. *3 When the audio output is set to "SUB." Using optional equipment Auxiliary audio equipment By connecting an optional portable audio device to the AUX input jack (stereo mini jack) on the unit and then simply selecting the source, you can listen on your car speakers. The volume level is adjustable for any difference between the unit and the portable audio device. Follow the procedure below: Connecting the portable audio device 1 Turn off the portable audio device. 2 Turn down the volume on the unit. 3 Connect to the unit. AUX AUX Connecting cord* (not supplied) * Be sure to use a straight type plug. Adjust the volume level Be sure to adjust the volume for each connected audio device before playback. 1 Turn down the volume on the unit. 2 Press (SOURCE) repeatedly until "AUX" appears. "FRONT IN" appears. 3 Start playback of the portable audio device at a moderate volume. 4 Set your usual listening volume on the unit. 5 Press the select button repeatedly until "AUX" appears, and rotate the volume control dial to adjust the input level (-8 dB to +18 dB).