Sony MEXBT2600 Operating Instructions - Page 25

Error displays/Messages BLANK Tracks have not been recorded on the MD.*1 t Play an MD with recorded tracks. ERROR*2 • The disc is dirty or inserted upside down.*1 t Clean or insert the disc correctly. • A blank disc has been inserted. • The disc cannot play due to a problem. t Insert another disc. FAILURE (Illuminates until any button is pressed.) The connection of speakers/amplifiers is incorrect. t See the installation/connections manual of this model to check the connection. FAILURE (Illuminates for about 1 second.) When the SAT tuner is connected, storing an SAT radio channel into a preset failed. t Be sure to receive the channel that you want to store, then try it again. LOAD The changer is loading the disc. t Wait until loading is complete. L. SEEK +/- The local seek mode is on during automatic tuning. NO DISC The disc is not inserted in the CD/MD changer. t Insert discs in the changer. NO INFO Text information is not written in the MP3/WMA file. NO MAG The disc magazine is not inserted in the CD changer. t Insert the magazine in the changer. NO MUSIC The disc is not a music file. t Insert a music CD in this unit or MP3 playable changer. NO NAME A disc/track name is not written in the track. NOT READ The disc information has not been read by the unit. t Load the disc, then select it on the list. NOTREADY The lid of the MD changer is open or the MDs are not inserted properly. t Close the lid or insert the MDs properly. OFFSET There may be an internal malfunction. t Check the connection. If the error indication remains on in the display, consult your nearest Sony dealer. PUSH EJT The disc cannot be ejected. t Press Z (eject) (page 9). READ The unit is reading all track and album information on the disc. t Wait until reading is complete and playback starts automatically. Depending on the disc structure, it may take more than a minute. RESET The CD unit and CD/MD changer cannot be operated due to a problem. t Press the RESET button (page 6). " " or " " During reverse or fast-forward, you have reached the beginning or the end of the disc and you cannot go any further. "" The character cannot be displayed with the unit. *1 The disc number of the disc causing the error appears in the display. *2 If an error occurs during playback of a CD or MD, the disc number of the CD or MD does not appear in the display. If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at the time the problem began. 25