Sony MHC-BX6AV Operating Instructions - Page 6
Connect the power cord to a wall, outlet., To connect optional components
View all Sony MHC-BX6AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Step 1: Hooking up the system (continued) 6 Connect the power cord to a wall outlet. The demonstration appears in the display. When you press ?/1, the system turns on and the demonstration automatically ends. If the supplied adapter on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with an adapter). To connect optional components See page 37. To deactivate the demonstration When you set the time ("Step 3: Setting the time" on page 9), the demonstration is deactivated. To activate/deactivate the demonstration again, press DISPLAY once (MHC-DX6AV) or twice (MHC-BX6AV) while the system is off. Tip You can reinforce the bass sound by connecting an optional super woofer to the super woofer connector. To attach the speaker pads Attach the supplied speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping. Center surround speaker Inserting two size AAA (R03) batteries into the remote Tip With normal use, the batteries should last for about six months. When the remote no longer operates the system, replace both batteries with new ones. Note If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage. 6