Sony MHC-DP1000D Operating Instructions - Page 58
Tape Deck, Tuner, Self-diagnosis function, When letters/numbers appear in the, display
View all Sony MHC-DP1000D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Troubleshooting (continued) Tape Deck The tape does not record. • The tab has been removed from the cassette (see "To save a tape permanently" on page 54). • The tape has reeled to the end. The tape does not record nor play, or there is a decrease in sound level. • The heads are dirty (see "Cleaning the tape heads" on page 54). • The record/playback heads are magnetized (see "Demagnetizing the tape heads" on page 54). The tape does not erase completely. • The record/playback heads are magnetized (see "Demagnetizing the tape heads" on page 54). There is excessive wow or flutter, or the sound drops out. • The capstans or pinch rollers are dirty (see "Cleaning the tape heads" on page 54). Noise increases, or the high frequencies are erased. • The record/playback heads are magnetized (see "Demagnetizing the tape heads" on page 54). After pressing nN or Z, there is a mechanical noise, "EJECT" appears in the display, and the unit enters standby mode automatically. • The cassette tape has not inserted correctly. Tuner There is severe hum or noise ("TUNED" or "STEREO" flashes in the display). • Adjust the antenna. • The signal is too weak. Connect an external antenna. A stereo FM program cannot be received in stereo. • Press FM MODE so that "MONO" disappears. If other troubles not described above occur, reset the system as follows: 1 Press x, DISPLAY and DISC 1 at the same time. 2 Unplug the power cord. 3 Plug the power cord back in. 4 Press ?/1 to turn on the power. The system is reset to the factory settings except for DVD settings. All the settings other than DVD settings you made, such as the preset stations, clock, and timer are cleared. You should set them again. Self-diagnosis function (When letters/numbers appear in the display) When the self-diagnosis function is activated to prevent the system from malfunctioning, a fivecharacter service number (e.g., C 13 00) with a combination of a letter and digits appears on the screen. In this case, check the following table. C:13:00 First three characters of the service number C 13 C 31 E XX (XX is a number) Cause and/or Corrective Action The disc is dirty , Clean the disc with a soft cloth (page 53). The disc is not inserted correctly. , Re-insert the disc correctly. To prevent a malfunction, the system has performed the selfdiagnosis function. , Contact your nearest Sony dealer or local authorized Sony service facility and give the 5-character service number. Example: E 61 10 58