Sony MHC-GTZ3 Operating Instructions - Page 35
Using the Radio Data System (RDS), (European model only), Creating your own sound effect
View all Sony MHC-GTZ3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Other Operations Using the Radio Data System (RDS) (European model only) What is the Radio Data System? Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. This tuner offers convenient RDS features such as station name. RDS is available only on FM stations.* Note RDS may not work properly if the station you are tuned in is not transmitting the RDS signal properly or if the signal is weak. * Not all FM stations provide RDS service, nor do they provide the same type of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. Receiving RDS broadcasts Simply select a station from the FM band. When you tune in a station that provides RDS services, the station name appears in the display. To check the RDS information While receiving an RDS station, press DISPLAY repeatedly. RDS information appears on the display. Creating your own sound effect You can raise or lower the levels of specific frequency ranges and then store up to the user equalizer in the memory. 1 Press EQ BAND repeatedly to select a frequency band and then turn OPERATION DIAL to adjust the equalizer level. Repeat this for each band you want to adjust. Frequency band Equalizer level GROOVE 1 2 3 REC AUTO TUNED ST MHz 2 Press ENTER (RM-AMU053) or (RM-AMU054). "USER EQ" appears and the setting is stored in the memory. To call up the user equalizer setting Press PRESET EQ (or EQ on the remote) repeatedly until "USER EQ" appears. To cancel the sound effect Press PRESET EQ (or EQ on the remote) repeatedly until "FLAT" appears. 35GB