Sony MHC-GTZ3 Operating Instructions - Page 46
Not In Use, Over Current
View all Sony MHC-GTZ3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
USB device DATA ERROR: You tried to play a file that is not playable. DEVICE ERROR: The USB device could not be recognized or an unknown device is connected (page 42). DEVICE FULL: The memory of the USB device is full. FATAL ERROR: The USB device was removed during transferring or erase operation, and may have been damaged. FOLDER FULL: You cannot transfer onto the USB device because the number of folders have reached its maximum. NO DEVICE: The USB device is not connected. NO MEMORY: External device is not inserted in mobile phone. NO STEP: All of the programmed steps have been erased. NO TRACK: No playable file is loaded in the system. NOT IN USE: You tried to perform a specific operation under conditions where that operation is prohibited. NOT SUPPORTED: An unsupported USB device is connected, or the USB device is connected to this system through a hub. OVER CURRENT: An over current was detected. PROTECTED: The USB device is writeprotected. PUSH STOP: You tried to perform an operation that can be performed only when the system is stopped. READING: The system is reading information of the USB device. Some buttons are not available. REC ERROR: Transferring did not start, stopped partway, or otherwise could not be performed (page 41). STEP FULL: You tried to program more than 25 steps. TRACK FULL: You cannot transfer onto the USB device because the number of files have reached its maximum. 46GB