Sony MHC-GX9000 MHCGX9000 Instructions (Main Stereo System) - Page 38

Tuner, Tape deck, Set CD POWER OFF by CD power manage

Page 38 highlights

MP3 audio track cannot be played back. • Recording was not performed according to the ISO9660 level 1, level 2, or Joliet in the expansion format. • The MP3 audio track does not have the extension ".MP3". • The data is not stored in MP3 format even though it has extension ".MP3". • The discs containing files other than MPEG 1, 2 and 2.5 Audio Layer-3 files cannot be played back. • The system can playback to a depth of 8 folders only. • MP3 audio tracks in MP3 PRO format cannot be played on this system. MP3 audio tracks take longer time to playback than others. • After the system reads all tracks on the discs, playback may take more time than usual if: - the number of albums or tracks on the disc is very large. - the album and track organization structure is very complex. The album title, track title, ID3 tag and the CD-TEXT characters do not appear properly. • Use a disc that conforms with ISO9660 level 1, level 2, or Joliet in the expansion format. • The ID3 tag is not version 1 or version 2. • The character code that can be displayed by this system are as follows. - Upper cases (A to Z) - Lower cases (a to z) - Numbers (0 to 9) - Symbols Other characters may not be displayed correctly. Tuner There is severe hum or noise/stations cannot be received. ("TUNED" or "STEREO" flashes in the display) • Set the proper band and frequency (page 16). • Connect the antenna properly (page 9). • Find a place and an orientation that provide good reception, then set up the antenna again. If you cannot obtain good reception, we recommend you connect an external antenna. • The supplied FM lead antenna receives signals along its entire length, so make sure you extend it fully. • Locate the antennas as far away from the speaker cords as possible. • Consult your nearest Sony dealer if the supplied AM antenna has come off the plastic stand. • Try turning off surrounding electrical equipment. • Set "CD POWER OFF" by CD power manage function (page 17). A stereo FM program cannot be received in stereo. • Press FM MODE until "MONO" disappears in the display. Tape deck The tape does not record or playback, or there is a decrease in sound level. • The heads are dirty (see "Cleaning the tape heads" on page 41). • The record/playback heads are magnetized (see "Demagnetizing the tape heads" on page 41). The tape does not erase completely. • The record/playback heads are magnetized (see "Demagnetizing the tape heads" on page 41). There is excessive wow or flutter, or the sound drops out. • The capstans or pinch rollers are dirty (see "Cleaning the tape heads" on page 41). Noise increases or the high frequencies are erased. • The record/playback heads are magnetized. (see "Demagnetizing the tape heads" on page 41). 38GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

38
GB
MP3 audio track cannot be played back.
Recording was not performed according to the
ISO9660 level 1, level 2, or Joliet in the expansion
format.
The MP3 audio track does not have the extension
“.MP3”.
The data is not stored in MP3 format even though
it has extension “.MP3”.
The discs containing files other than MPEG 1, 2
and 2.5 Audio Layer-3 files cannot be played
back.
The system can playback to a depth of 8 folders
only.
MP3 audio tracks in MP3 PRO format cannot be
played on this system.
MP3 audio tracks take longer time to playback
than others.
After the system reads all tracks on the discs,
playback may take more time than usual if:
– the number of albums or tracks on the disc is
very large.
– the album and track organization structure is
very complex.
The album title, track title, ID3 tag and the
CD-TEXT characters do not appear properly.
Use a disc that conforms with ISO9660 level 1,
level 2, or Joliet in the expansion format.
The ID3 tag is not version 1 or version 2.
The character code that can be displayed by this
system are as follows.
– Upper cases (A to Z)
– Lower cases (a to z)
– Numbers (0 to 9)
– Symbols (< > * +, – / [ ] \ _)
Other characters may not be displayed correctly.
Tuner
There is severe hum or noise/stations cannot
be received. (“TUNED” or “STEREO” flashes
in the display)
Set the proper band and frequency (page 16).
Connect the antenna properly (page 9).
Find a place and an orientation that provide good
reception, then set up the antenna again. If you
cannot obtain good reception, we recommend you
connect an external antenna.
The supplied FM lead antenna receives signals
along its entire length, so make sure you extend it
fully.
Locate the antennas as far away from the speaker
cords as possible.
Consult your nearest Sony dealer if the supplied
AM antenna has come off the plastic stand.
Try turning off surrounding electrical equipment.
Set “CD POWER OFF” by CD power manage
function (page 17).
A stereo FM program cannot be received in
stereo.
Press FM MODE until “MONO” disappears in the
display.
Tape deck
The tape does not record or playback, or there
is a decrease in sound level.
The heads are dirty (see “Cleaning the tape heads”
on page 41).
The record/playback heads are magnetized (see
“Demagnetizing the tape heads” on page 41).
The tape does not erase completely.
The record/playback heads are magnetized (see
“Demagnetizing the tape heads” on page 41).
There is excessive wow or flutter, or the sound
drops out.
The capstans or pinch rollers are dirty (see
“Cleaning the tape heads” on page 41).
Noise increases or the high frequencies are
erased.
The record/playback heads are magnetized. (see
“Demagnetizing the tape heads” on page 41).