Sony MHC-MG110 Operating Instructions (primary manual) - Page 28

Labeling titles through the keyboard (continued) Editing operations while labeling To Cancel the operation Move the cursor Erase the character at the cursor position Erase the character preceding the cursor Press [Esc] [T] or [t] [Delete] [Back Space] Operating the system through the keyboard You can operate the system without using the buttons and controls on the unit or on the remote. As the keyboard substitutes for the following functions CD PLAY CD PAUSE CD STOP DISC ACCESS (DISCt) TUNER/BAND - . > + DISPLAY Press [F5] [F6] [F7] [F8] [F9] [F10] [F11] [F12] Optional Components Hooking up the optional A/V components You can connect a digital or an analog component to this system. To the audio output jacks of an MD deck, a VCR, etc. To the digital input jack of a digital component To Make a digital recording from CD to MD Listen to the analog sound of a connected VCR Listen to the analog sound of the connected MD deck Make an analog recording from MD onto a tape Do this Connect an optical cable. Connect the audio cords. Press 5.1CH/VIDEO (MD)* repeatedly until "VIDEO" appears. With the system turned off, press 5.1CH/VIDEO (MD)* while holding down ENTER. This switches the "VIDEO" function to "MD". Once you enable the "MD" function, just press 5.1CH/VIDEO (MD)*. Then connect the audio cords. Press 5.1CH/VIDEO (MD)* repeatedly until "MD" appears. Connect the audio cords. Press 5.1CH/VIDEO (MD)* repeatedly until "MD" appears. * VIDEO (MD) for MHC-MG110 or on the remote 28