Sony MHC-RG40 Operating Instructions - Page 15
Recording to a tape — CD Synchro Recording/ Recording Manually/ Program Edit
View all Sony MHC-RG40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Tape Recording to a tape - CD Synchro Recording/Recording Manually/Program Edit You can record from a CD, tape or radio. You can use TYPE I (normal) tapes. The recording level is adjusted automatically. Steps 1 2 3 4 5 6 7 Recording from a CD (CD Synchro Recording) Recording from a CD/tape/radio manually Load a recordable tape into deck B. Press CD. Press CD, TAPE A/B or TUNER/BAND. Load the CD you want to record. Load the CD/tape, or tune in the station you want to record. Press CD SYNC. Deck B stands by for recording. REC PAUSE/START button flashes. Press REC PAUSE/START. Press DIRECTION repeatedly to select g to record on one side. Select j (or RELAY) to record on both sides. Press REC PAUSE/START. Recording starts. Press nN to start playing the source to be recorded. To stop recording Press x. Tips • If you want to record from the reverse side, press TAPE A/B to select deck B after step 1. Press nN to start playback of the reverse side, then press x when you want to start recording. The TAPE B reverse side indicator lights up. • When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side. • For recording from the radio: If noise is heard while recording from the radio, move the respective antenna to reduce the noise. Note You cannot listen to other sources while recording. continued 15