Sony MHC-RG40 Operating Instructions - Page 27

Specifications AUDIO POWER SPECIFICATIONS: (MHC-RG40 USA models only) POWER OUTPUT AND TOTAL HARMONIC DISTORTION: with 6 ohm loads both channels driven, from 120 - 10,000 Hz; rates 100 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milliwatts to rated output. Total harmonic distortion less than 0.07% (6 ohms at 1 kHz, 50 W) (MHC-RG30 USA models only) POWER OUTPUT AND TOTAL HARMONIC DISTORTION: with 6 ohm loads both channels driven, from 120 - 10,000 Hz; rates 60 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milliwatts to rated output. Total harmonic distortion less than 0.07% (6 ohms at 1 kHz, 30 W) Amplifier section Canadian models: MHC-RG60 Continuous RMS power output (reference) 100 + 100 watts (6 ohms at 1 kHz, 10% THD) Total harmonic distortion less than 0.07% (6 ohms at 1 kHz, 50 W) MHC-RG40 Continuous RMS power output (reference) 100 + 100 watts (6 ohms at 1 kHz, 10% THD) Total harmonic distortion less than 0.07% (6 ohms at 1 kHz, 50 W) MHC-RG30 Continuous RMS power output (reference) 60 + 60 watts (6 ohms at 1 kHz, 10% THD) Total harmonic distortion less than 0.07% (6 ohms at 1 kHz, 30 W) European models: MHC-RG60 DIN power output (rated) 80 + 80 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 100 + 100 watts (6 ohms at 1 kHz, 10% THD) Music power output (reference) 180 + 180 watts (6 ohms at 1 kHz, 10% THD) MHC-RG40 DIN power output (rated) 65 + 65 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 80 + 80 watts (6 ohms at 1 kHz, 10% THD) Music power output (reference) 150 + 150 watts (6 ohms at 1 kHz, 10% THD) MHC-RG30 DIN power output (rated) 50 + 50 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 60 + 60 watts (6 ohms at 1 kHz, 10% THD) Music power output (reference) 115+ 115 watts (6 ohms at 1 kHz, 10% THD) Additional Information Other models: MHC-DX30 The following measured at AC 120, 220, 240 V 50/60 Hz DIN power output (rated) 100 + 100 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 120 + 120 watts (6 ohms at 1 kHz, 10% THD) MHC-DX20 The following measured at AC 120, 220, 240 V 50/60 Hz DIN power output (rated) 50 + 50 watts (6 ohms at 1 kHz, DIN) Continuous RMS power output (reference) 60 + 60 watts (6 ohms at 1 kHz, 10% THD) Inputs MD/VIDEO (AUDIO) IN (phono jacks): voltage 450/250 mV, impedance 47 kilohms GAME (AUDIO) IN (phono jack): voltage 450 mV, impedance 47 kilohms MIC (mini jack): sensitivity 1 mV, impedance 10 kilohms Outputs PHONES (stereo mini jack): accepts headphones of 8 ohms or more FRONT SPEAKER: accepts impedance of 6 to 16 ohms SURROUND SPEAKER (MHC-RG60 only): accepts impedance of 6 to 16 ohms continued 27