Sony MHC-V7D Operating Instructions - Page 44

Using optional equipment, Sleep Timer, Play Timer/Recording, Timer

Page 44 highlights

Sleep Timer The system turns off automatically after the preset time. Press SLEEP repeatedly. To cancel Sleep Timer, press SLEEP repeatedly to select "OFF". Tip To check the remaining time before the system turns off, press SLEEP. Play Timer/Recording Timer Make sure you have set the clock (page 17). Play Timer: You can set the system to turn on and play a disc, USB device, or radio station automatically at the preset time. Recording Timer: You can transfer music from a preset radio station to a USB device at a specified time. 1 For Play Timer: Prepare the sound source, then press  +/- to adjust the volume. To start from a specific track or file, create your own program (page 23). For Recording Timer: Tune to the preset radio station (page 33). 2 Hold down SHIFT, then press TIMER MENU. 3 Press / repeatedly to select "PLAY SET" or "REC SET", then press . 4 Set the time to start playback or transfer. Press / repeatedly to set the hour/minute, then press . 44GB 5 Use the same procedure as in step 4 to set the time to stop playback or transfer. 6 Press / repeatedly to select the sound source you want, then press . For Recording Timer: Connect a transferable USB device to the (USB) 2 port. 7 Press  to turn off the system. To check the timer setting or activate the timer again 1 Hold down SHIFT, then press TIMER MENU. "TIMERSEL" flashes in the display panel. 2 Press . 3 Press / repeatedly to select "PLAY SEL" or "REC SEL", then press . To cancel the timer Repeat the same procedure as above and select "OFF" in step 3, then press . Notes  The system turns on before the preset time. If the system is turned on at the preset time or if "STANDBY" flashes in the display panel, the Play Timer and the Recording Timer will not play or transfer.  Do not operate the system from the time the system turns on until the playback or transfer starts. Using optional equipment 1 Press  - repeatedly until "VOL MIN" appears in the display panel.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

44
GB
The system turns off automatically
after the preset time.
Press SLEEP repeatedly.
To cancel Sleep Timer, press SLEEP
repeatedly to select “OFF”.
To check the remaining time before the
system turns off, press SLEEP.
Make sure you have set the clock
(page 17).
Play Timer:
You can set the system to turn on and
play a disc, USB device, or radio station
automatically at the preset time.
Recording Timer:
You can transfer music from a preset
radio station to a USB device at a
specified time.
1
For Play Timer:
Prepare the sound source, then
press
+/– to adjust the volume.
To start from a specific track or file,
create your own program (page 23).
For Recording Timer:
Tune to the preset radio station
(page 33).
2
Hold down SHIFT, then press
TIMER MENU.
3
Press
/
repeatedly to select
“PLAY SET” or “REC SET”, then
press
.
4
Set the time to start playback or
transfer.
Press
/
repeatedly to set the
hour/minute, then press
.
5
Use the same procedure as in step
4 to set the time to stop playback
or transfer.
6
Press
/
repeatedly to select
the sound source you want, then
press
.
For Recording Timer:
Connect a transferable USB device
to the
(USB) 2 port.
7
Press

to turn off the system.
To check the timer setting or
activate the timer again
1
Hold down SHIFT, then press TIMER
MENU.
“TIMERSEL” flashes in the display
panel.
2
Press
.
3
Press
/
repeatedly to select
“PLAY SEL” or “REC SEL”, then press
.
To cancel the timer
Repeat the same procedure as above
and select “OFF” in step 3, then press
.
The system turns on before the preset
time. If the system is turned on at the
preset time or if “STANDBY” flashes in
the display panel, the Play Timer and the
Recording Timer will not play or transfer.
Do not operate the system from the time
the system turns on until the playback or
transfer starts.
Using optional
equipment
1
Press
– repeatedly until “VOL
MIN” appears in the display panel.
Sleep Timer
Tip
Play Timer/Recording
Timer
Notes