Sony MRW68E-D1 Operating Instructions - Page 1
Sony MRW68E-D1 Manual
View all Sony MRW68E-D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
4-140-749-12 (1) Multi-Card Reader/Writer Operating Instructions Before operating the unit, please read this document thoroughly, and retain it for future reference. MRW68E-D1 © 2008 Sony Corporation Printed in China http://www.sony.net/ WARNING Keep the unit away from children. If any part of the unit is swallowed, promptly see a doctor. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Caution This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note If you have any questions about this product, you may call the telephone number listed in "Technical Support." The telephone number below is not for customer service but only for official purposes. Declaration of Conformity Trade Name: SONY Model No.: MRW68E Responsible Party: Sony Electronics Inc. Address: 16530 Via Esprillo, San Diego, CA 92127 U.S.A. Telephone No.: 858-942-2230 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTICE TO USERS All rights reserved. This manual described herein, in whole or in part, may not be reproduced or translated to any machinereadable form without prior written approval from Sony Corporation. IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE DEVICE DRIVERS OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. SONY CORPORATION IS NOT RESPONSIBLE FOR ANY DAMAGE TO OR LOSS OF ANY PROGRAMS, DATA, OR OTHER INFORMATION STORED ON ANY MEDIA. Copyright law prohibits unauthorized use of any recorded audio/video for any other purpose than personal enjoyment. Please be warned that the "Memory Stick" containing images and data protected by copyright shall be strictly used within copyright law. Trademarks • , "Memory Stick," "Memory Stick Duo," "Memory Stick PRO Duo," "Memory Stick PRO-HG Duo," "Memory Stick Micro," "M2," and "MagicGate" are registered trademarks or trademarks of Sony. • Microsoft®, Windows®, and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States of America and/or other countries. • Macintosh® and Mac OS® are registered trademarks of Apple, Inc. in the United States of America and/or other countries. • Other system names, product names, and company names appearing in this manual are trademarks or registered trademarks of their respective holders, even though not indicated by the ® or ™ marks. Overview The MRW68E-D1 (hereafter referred to as the "reader/writer") has the following features: s Quick and simple data transfer - easily transfer images from camera to PC s Quick to Connect - Hot-pluggable USB-powered design s Compatible with "Memory Stick Duo", SD Memory Card, MultiMediaCard. System Requirements The reader/writer requires the following minimum system configuration: • OS - Windows® 7 - Windows Vista® - Windows® XP Home or Professional - Windows® 2000 Professional (Service Pack 4 or later) - Mac OS® X 10.2 or later This product works with the standard Windows drivers. Supported Media The reader/writer supports the following media: "Memory Stick" media • "Memory Stick Duo" (without MagicGate) • "MagicGate Memory Stick Duo" • "Memory Stick Duo" (with MagicGate) *1 • "Memory Stick PRO Duo" *1 • "Memory Stick PRO-HG Duo" *1 • "Memory Stick Micro" ("M2") *1*2*4 SD Memory cards • SD Memory Card • SDHC™ Memory Card • miniSD™ Card*4 • miniSDHC™ Card*4 • microSD™ Card*4 • microSDHC™ Card*4 MultiMediaCards • MultiMediaCard • RS-MMC*4 • MMCplus*3 • MMCmobile*3*4 • MMCmicro*4 *1 4-bit parallel data transfer is supported. It, however, varies depending on each medium and how long it takes to read/write data. *2 "M2" is an abbreviation of "Memory Stick Micro". In this document, hereinafter, the abbreviation "M2" is used. *3 8-bit parallel data transfer is not supported. *4 With adaptor only (not supplied). Notes • In this manual, all types of media listed in "Supported Media" are generically called memory cards. • Not all memory cards are guaranteed to work. Operation is not assured if non-supported memory cards are used. • "MagicGate®" is the general name of a copyright protection technology developed by Sony. • Recording or playback of the data that uses "MagicGate" technology is not supported. MagicGate is copyright protection that uses encryption technology. Data recording/ playback by using MagicGate technology such as music that requires copyright protection is only compatible with MagicGate supported equipment. • The capacity of a file to be recorded/played back is smaller than 4GB per file according to the specifications of the system incorporated in "Memory Stick". • Although operation check of this product has been performed with up to 8 GB "Memory Stick," please note that the operation is not guaranteed for every type of "Memory Stick." • The "Memory Stick" media, SD memory cards and MultiMediaCards all use the same slot, so you cannot use them at the same time. • Only DOS format is supported. Memory cards in other formats are not supported. About Memory Stick What is "Memory Stick"? "Memory Stick" is a compact-size IC recording medium with a large storage capacity. It has been designed not only for exchanging/sharing digital data among "Memory Stick" compliant products, but also for serving as an insertable/ removable external storage medium that can save data. Notes on "Memory Stick" On formatting (initialization) • If you format a medium in which data has been already written, all the data and software will be erased. Please be cautious not to mistakenly erase any important data. • Please make sure to format (initialize) a medium with the formatter of a "Memory Stick" compliant product. If it is initialized with Windows Explorer, a FORMAT ERROR occurs, and data on the medium can no longer be used by this product. About the size of "Memory Stick" • Standard-size "Memory Stick" media cannot be used on this product. • Do not insert multiple "Memory Stick" media at the same time. It might cause damage to the product. • When you use "Memory Stick Duo" on this product, please make sure to insert it in the right direction. • "Memory Stick Duo," "Memory Stick Micro," and M2 Duo size Adaptor should be kept away from small children to prevent them from accidentally swallowing it. • When you use "Memory Stick Micro" on this product, please make sure to attach the medium into M2 Duo size adapter. If you attempt to insert "Memory Stick Micro" without attaching to M2 Duo size adapter, there is a possibility that it cannot be pulled out. Usage Notes Notes on using "Memory Stick Duo/Memory Stick PRO Duo" Terminal Write-Protected switch Memo area • When you use "Memory Stick Duo/Memory Stick PRO Duo" without Write-Protected switch, be careful not to edit or erase important data by mistake. • When you use "Memory Stick Duo/Memory Stick PRO Duo" with Write-Protected switch, data cannot be recorded, edited, or erased by enabling "LOCK" on the switch. • Use an object with a sharp tip to move the Write-Protected switch. • Do not press on the memo area strongly when writing. • Carry and keep "Memory Stick" in the supplied case. Other Points to Note Media formatting Do not format (initialize) memory cards with a computer. If you format a memory card with a computer, devices such as digital cameras may not be able to use it due to differences in format type (FAT size, cluster size, hard disk type, or super floppy disk type). If you use a digital camera, format memory cards with your camera, instead. Restrictions on DOS mode In Windows, the reader/writer does not operate in DOS mode. To use the reader/writer, start up Windows. Standby The reader/writer supports standby functions based on the PC2000 standard, which may not cover the standby function of all computers. Disable the standby function of your computer if it causes any problems. While the computer is in standby, do not insert or remove any media. Do not attempt to dismantle, repair, or alter the reader/writer yourself Do not, under any circumstances, attempt to dismantle, repair, or alter the reader/writer yourself. You may not only permanently damage the reader/writer and/or your computer, but may also cause fire or personal injury through electrical shock. Operating and storage environments • Do not place the reader/writer close to heat sources or in direct sunlight; in dusty, dirty, or humid locations; under precipitation such as rain; or leave it in a vehicle with the windows closed. • If the reader/writer interferes with the reception of radio or television signals, move the reader/writer away from the radio or television. • When using the reader/writer, do not wrap it in cloth, sheets, or covers as this may cause a malfunction or fire. Specifications USB transfer rate Full-speed (12 Mbps) High-speed (480 Mbps) This high-speed transfer rate is a theoretical value for the USB standard. Actual performance is dependent on the device. Power requirements 4.75 to 5.25 V DC Current consumption Max. 500 mA Access indicator Lit during the memory card insertion. Blinks on access. Operating environment Temperature: 5 °C to 40 °C (41 °F to 104 °F) Humidity: 30% to 80% RH Storage environment Temperature: -30 °C to + 60 °C (-22 °F to +140 °F) Humidity: No condensation Dimensions (W x H x D) Approx. 31.7 × 11.2 × 57 mm (1 1/4 × 15/32 × 2 1/4 inches) (excluding protrusions) Mass Approx. 17 g (0.60 oz.) (TYP) Package Contents When you unpack the box, make sure that it contains all the accessories listed below. If anything is missing or damaged, contact your retailer. • MRW68E-D1 Multi-Card Reader/Writer • Operating Instructions • Warranty Card Parts and Functions 1 Cap 2 USB connector Connect to a computer 3 Memory Card slot Insert memory cards here. This slot is compatible with "Memory Stick Duo" size media, SD memory cards and MultiMediaCards. Using the Reader/Writer Inserting a Memory Card Insert a memory card into the slot on the reader/writer. When inserting a card, push it in as far as it can go. To insert a "Memory Stick" * Push at the left side. To insert a SD Memory Card/ MultiMediaCard. Notes • Insert only one memory card into the slot. Do not insert multiple cards at the same time. • When inserting a "Memory Stick Micro" ("M2"), miniSD Card, miniSDHC Card, microSD Card, microSDHC Card, RS-MMC, MMCmobile or MMCmicro, use an appropriate adaptor (not supplied). • Do not insert a card upside down. • Forcibly inserting the card may damage the card or the slot. • If a memory card is inserted incorrectly, you may not be able to remove it. In the unlikely event that a memory card becomes stuck in the reader/writer, consult your local Sony dealer. Connecting the Reader/Writer to a Computer Simply connect the reader/writer to a computer directly. 1 Start the computer. 2 Pull off the cap of the reader/writer. 3 Insert a memory card. 4 Connect the USB header of the reader/writer to the USB port on the computer. The computer recognizes the reader/writer as a removable disk, and the reader/writer is ready for use. Notes • Do not connect to a computer via a USB hub. • Depending on the computer and the status of its operating system, the reader/writer may not operate or may become unstable. If this occurs, refer to the "Troubleshooting" section. • After disconnecting from the USB port, wait at least 5 seconds before reconnecting it. (Otherwise, the reader/writer may not be recognized.) • When two or more USB devices are connected to one computer, the reader/writer is not guaranteed to operate simultaneously with some types of USB devices. • You may not access two or more memory cards simultaneously on a single computer by connecting additional memory card devices. Remove any memory cards from the reader/writer or turn off the other devices. • Do not remove a memory card from the reader/writer while the access indicator is blinking. The data stored on the memory card may be damaged.