Sony MZ-B100 Operating Instructions (primary manual) - Page 15

To listen in stereo Connect the supplied headphones with a remote control to the i jack on the recorder. To Operation on the recorder Operation on the remote control (Beeps in the headphones) Find the beginning of the current track or a previous track1) Press .REVIEW/AMS. Press .REVIEW/AMS repeatedly until you reach the beginning of the desired track. Press .. (Three short beeps) Press . repeatedly until you reach the beginning of the desired track. Find the beginning of Press >CUE/AMS. the next track2) Press >N. (Two short beeps) Pause Press XPAUSE. Press XPAUSE again to resume play. Press X on the remote control. (Continuous short beeps) Press X again to resume play. Go backwards while Press and hold .REVIEW/ Press and hold .. playing AMS. Go forward while playing Press and hold >CUE/ AMS. Press and hold >N. Remove the MD Press xSTOP and open the lid.3) Press x. (One short beep) 1) If you press .REVIEW/AMS during the first track of the disc, the recorder goes to the beginning of the last track on the disc. 2) If you press >CUE/AMS during the last track of the disc, the recorder goes to the beginning of the first track on the disc. 3) Once you open the lid, the point to start play will change to the beginning of the first track. If the play does not start Make sure the recorder is not locked (pages 9 and 41). To locate a point quickly Use the EASY SEARCH +/- buttons (page 28). z Playback will switch automatically between stereo and monaural according to the sound source. Notes • The sound may skip during playback when the recorder is exposed to continuous vibration, such as while jogging. • If the power supply is disrupted (i.e. the batteries are removed or become exhausted or the optional AC power adaptor is disconnected) when the recorder is operating, the lid may not open until the power is restored. 15-GB