Sony MZ R37 Operating Instructions - Page 30
Messages, Error message, Meaning/Remedy
UPC - 027242550247
View all Sony MZ R37 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Messages If the following error messages flash in the display window, check the chart below. Error message BLANK ERROR FULL EDIT BUSY HiDCin HOLD LoBATT MEMORY Meaning/Remedy • An MD with no recording on it is inserted. b Insert a recorded MD. • The disc is damaged or does not contain proper recording or editing data. b Reinsert the disc. If this fails, rerecord. • There is no more space to record on the disc (less than 12 seconds available). b Replace the disc. • You tried to enter more than 200 letters to label a single track or disc. • You tried to enter a total of more than 1700 letters for track or disc names during playback or stop. • You tried to enter a total of more than 500 letters for track or disc names during a single recording. b Enter the characters within the limit. • The MD player is recording information (track start and end position) from the memory to the disk. b Wait until this process is completed. Do not expose the player to physical shock, nor disrupt power supply. • You tried to operate the recorder while it was accessing the recorded data. b Wait until the message goes out (in rare cases, it may take 2-3 minutes). • Voltage of the power supply is too high (The supplied AC power adaptor is not used). b Use the supplied AC power adaptor. • The recorder is locked. b Slide HOLD against the arrow to unlock the recorder (page 17). • Batteries are weak. b Charge the rechargeable batteries or replace the dry batteries (pages 23, 24). • You tried to record when there is no indication in the display, with the recorder placed where it receives continuous vibration. b Put the recorder on a stable place, and start recording again. 30