Sony MZ-R700 Operating Instructions - Page 26
SYNC REC, SYNC indicator
View all Sony MZ-R700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
2 Press
26
2
Press
<
MENU
,
repeatedly until
“
SYNC REC
”
flashes in the
display, and then press ENTER.
“
SYNC
”
does not appear if optical cable is not connected to the
recorder.
3
Press
<
MENU
,
repeatedly until
“
SYNC ON
”
flashes in the
display, and then press ENTER.
4
Press and slide REC to the right.
The recorder stands by for recording.
5
Play the source sound.
The recorder starts recording when it receives the playing sound.
To stop recording, press
x
.
z
•
You cannot pause manually during synchro-recording.
•
When there is no sound from the player for more than 3 seconds during
synchro-recording, the recorder goes into the standby mode automatically.
When the sound comes from the player again, the recorder resumes synchro-
recording. If the recorder is kept in the standby mode for 5 minutes or longer,
the recorder stops automatically.
•
For longer recording, follow step 1 of
“
Recording for long times
”
(page 24)
to select the recording mode, and then do the procedure of synchro-
recording.
Notes
•
Do not change SYNC REC setting while recording. Recording may not be
done properly.
•
Even when there is no recorded sound on the sound source, there may be
cases when recording does not pause automatically during synchro-recording
due to the noise level emitted from the sound source.
•
If a silent portion is encountered for 2 seconds or more during synchro-
recording from a sound source other than a CD or an MD, a new track mark
is automatically added at the point where the silent portion ends.
SYNC REC
SYNC indicator