Sony NSBKEB05 Installation Guide (NSBK-EB05 Installation Manual) - Page 10

Caution When using cameras and power supply units that superimpose DC voltage on the video coaxial cable, pay close attention to the coaxial cable wiring. If the camera cable on which DC voltage is superimposed is connected to the NSR-500 series, malfunctions may occur. Analog cameras Power supply unit VIDEO OUT NSR-500 series Coaxial cable Coaxial cable on which DC voltage is superimposed Be careful not to connect the coaxial cable for the analog cameras to the NSR-500 series. Notes • To perform pan, tilt, and zoom, control numbers must be configured. Be sure that the numbers do not overlap when multiple analog cameras are connected. For details on configuring control numbers, refer to the operating instructions for the analog camera. • For details on the pin assignment for the RS-422/485 connector, refer to the Installation Manual for the NSR-500 series. Specifications Analog encoder board External connector Analog camera cable input (1) Analog camera input cable Video input connectors Composite BNC (16) (black, V1 to V16) 1 Vp-p, 75 Ω Audio input connectors Pin jack (4) (white, A1 to A4) Design and specifications are subject to change without notice. 10 Specifications