Sony NSBKEB05 Installation Guide (NSBK-EB05 Installation Manual) - Page 7

Caution, two points and confirm that the board

Page 7 highlights

2 Confirm the installation position. Install the analog encoder board here. 4 Insert the analog encoder board with the proper orientation. 5 Install the analog encoder board. Make a visual check at the following two points and confirm that the board is firmly connected. Rear panel side 3 Pull the protection cover upward and remove it. Make a visual check. Caution Incomplete and/or skewed insertion of the board can cause improper connection. 7 Step 1: Installing the Analog Encoder Board on the NSR-500 Series

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

7
Step 1: Installing the Analog Encoder Board on the NSR-500 Series
2
Confirm the installation position.
3
Pull the protection cover upward and
remove it.
4
Insert the analog encoder board with
the proper orientation.
5
Install the analog encoder board.
Make a visual check at the following
two points and confirm that the board
is firmly connected.
Incomplete and/or skewed insertion of
the board can cause improper
connection.
Install the analog
encoder board here.
Rear panel side
Caution
Make a visual check.