Sony NWZX1061FBLK Service Manual - Page 22
Format FORMAT
UPC - 027242755192
View all Sony NWZX1061FBLK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
NWZ-X1050/X1051/X1060/X1061 4-4-2. Key check (KEY) The operation of the key is confirmed. Checking method: 1. Enter the test mode. 2. Press the [>]/[.] key to select the "OTHER", and press the [u] key to enter the minor item. 3. Press the [>]/[.] key to select the "KEY". 4. Press the [u] key, all keys are displayed. Screen display REW HOLD OTHER KEY PLAY FF VOL+ VOL- NC START 5. The character corresponding to the key is selected every time the key is pressed. "OK" is displayed if all keys are pressed. 6. Slide the [HOLD] key from ON to OFF, return to minor item selection screen. 4-4-3. Frequency check that presses key (KEYNUM) The frequency to which the key is pressed, insert/pull out frequency of cradle and insert/pull out frequency of the headphone are displayed. Note: Not used for the servicing. 4-4-4. Touch panel check (TOUCH) The position in which the touch panel is pressed is displayed. Checking method: 1. Enter the test mode. 2. Press the [>]/[.] key to select the "OTHER", and press the [u] key to enter the minor item. 3. Press the [>]/[.] key to select the "TOUCH". 4. Enter the mode when the [u] key is pressed. When the touch panel is pressed, the position in which the touch panel is pushed at that time is displayed. Screen display OTHER TOUCH #0 60fps XX-XX-XX-XX-XX-XX XX-XX-XX-XX-XX NO GESTURE 4-4-5. Format (FORMAT) The user's area is formatted, and ICV for the video and ICV for audio are initialized. Note: Not used for the servicing. Format the set from "Settings" → "Common settings" → "Format" when it home menu in usually operates when the set should format it. 4-4-6. Destination setting (DEST) The destination setting, language information, and sound pressure regulation information are written in the NAND flash memory. Note: Not used for the servicing. 4-4-7. Sound pressure regulation setting (SPSET) ON/OFF of sound pressure regulation is confirmed. Note: Not used for the servicing. 4-4-8. Firmware version check (FWVER) The firmware version is displayed. Checking method: 1. Enter the test mode. 2. Press the [>]/[.] key to select the "OTHER" and press the [u] key to enter the minor item. 3. Press the [>]/[.] key to select the "FWVER". 4. Press the [u] key, the firmware version is displayed. Screen display OTHER FWVER X.XX.XX MODEL NAME NWZ-#### SERIAL NO @@@@@@@ WIFI MAC ADR WIFI MAC ADR(NVP X.XX.XX : Firmware version #### : Model name @@@@@@@ : Serial No. MAC address of WiFi module MAC address of WiFi in NVP 5. Press the [HOME] key, return to minor item selection screen. 5. Press the [HOME] key, return to minor item selection screen. 22