Sony PAM-200 Installation Manual - Page 5
Attaching the Mount, Optional Hardware - mounting bracket
UPC - 027242240773
View all Sony PAM-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
PAM-200 Attaching the Mount Unpack the PAM-200 and review any WARNING statements that apply to the installation. Select the desired location for the PAM-200. M5 Allen Wrench M4 x 10mm Security Head Screw 1. Locate the mounting points on the bottom of the projector (see arrows above for mounting point recognition). 2. Line up the mounting holes on the PAM-200 with the mounting points of the projector. 3. Use three (3) M4 x 10mm security head screws to attach the PAM-200 to the projector. 4. Tighten the security head screws down with a M5 Security Allen wrench (supplied). 5. Do not overtighten these screws, as the threaded inserts can be damaged. Optional Hardware When mounting the PAM-200 to a Sony projector, it is imperative that the projector plate not cover any access plates that allow the user to access the interior of the projector. The following steps will allow the user to mount the PAM-200 projector bracket to the Sony projector without fear of blocking any ventilation access plates. Nylon Spacer M5 Allen Wrench M4 x 16mm Security Head Screw Nylon Spacer 1. Locate the mounting points on the bottom of the projector (see arrows above for mounting point recognition). 2. Place the nylon spacers over the mounting points. 3. Line up the mounting holes of the PAM-200 with the nylon spacer mounting holes. 4. Use three (3) M4 x 16mm security head screws to attach the PAM-200 to the projector. 5. Tighten the security head screws down with a M5 Security Allen wrench (supplied). 6. Do not overtighten these screws, as the threaded inserts can be damaged. Installation Manual Page - 5 -