Sony PCG-R505GL User Guide - Page 65
Printers and Other Hardware, Ports COM&LPT - driver
View all Sony PCG-R505GL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Printing With Your Computer ❑ You may need to install the printer driver software before you use the printer. See the instructions that came with your printer for information about installing these drivers. ❑ If the printer is not functioning after the computer resumes from a power saving mode (Standby or Hibernate), reset the printer connection. 1 Click Start, and click Control Panel. 2 Click Printers and Other Hardware, and click Printers and Faxes. 3 Right-click the printer icon that is not functioning, and select Properties to open the Properties window. 4 Click OK. ❑ Change the default printer port setting, although this setting is generally correct for most printers. 1 Click Start, and click Control Panel. 2 Click Performance and Maintenance, and click System. The System Properties dialog box appears. 3 Select the Hardware tab, and click Device Manager. The Device Manager window appears. 4 Double-click Ports (COM&LPT), and double-click ECP Printer Port (LPT1). 5 Select the Port Settings tab, and select a different LPT Port Number. ❑ You may need to enable the computer's printer settings. 1 Click Start, and point to All Programs, Sony Notebook Setup, and click Sony Notebook Setup again. 2 Click the Device tab. 3 In the left panel, make sure the Printer Port check box is selected, and click Setting. 4 In the Printer port mode box, click the ECP option. 5 Click OK. 65