Sony PCV-L620 Computer Reference Manual - Page 38
Installing System Memory, Removing a Memory Module - support
View all Sony PCV-L620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
30 VAIO Computer Reference Manual Installing System Memory ! Before opening the system unit, save any open files, exit Windows, turn off the power of the computer and all attached peripherals, and then unplug the power cord. 1 If necessary, remove the memory module you wish to replace (see "Removing a Memory Module" on page 32). 2 Remove the new memory module(s) from its anti-static package. Hold the memory module only by its edges to prevent staticelectricity damage. 3 Choose the size of the memory module and configuration as shown in the following table. Memory modules can vary in size and speed between sockets. The minimum memory size is 8 MB. The maximum memory size is 256 MB. The BIOS automatically detects the type, size, and speed of the memory modules. Memory module configurations (MB) DIMM1 0, 8, 16, 32, 64, 128 DIMM2 0, 8, 16, 32, 64, 128 ! Touch any exposed metal part of the chassis to discharge static electricity in your body before handling a memory module. Use only 100 MHz FSB-supported memory. Do not mix 66 MHz memory with 100 MHz memory. Supports SDRAM memory. Does not support EDO memory or buffered DIMM memory.