Sony PCV-RX463DS System Reference Manual - Page 60
To install a 3.5-inch internal hard disk drive (all models)
View all Sony PCV-RX463DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
46 VAIO Digital Studio™ System Reference Manual To install a 3.5-inch internal hard disk drive (all models) 1 Configure the jumpers on the new drive as a slave device (see your drive's documentation for configuration instructions). Power connector Jumpers Drive connector 2 Remove the side cover (see "Removing the Side Cover" on page 28). 3 Disconnect the drive connector (A in diagram). Drive connector A B C Power supply connector Tab Disk drive holder 4 Disconnect the power connector (B in diagram). 5 Pull out on the tab (C) that secures the drive holder to the chassis.
VAIO Digital Studio™ System Reference Manual
46
To install a 3.5-inch internal hard disk drive (all models)
1
Configure the jumpers on the new drive as a slave device (see your
drive’s documentation for configuration instructions).
2
Remove the side cover (see
“Removing the Side Cover”
on page 28).
3
Disconnect the drive connector (A in diagram).
4
Disconnect the power connector (B in diagram).
5
Pull out on the tab (C) that secures the drive holder to the chassis.
Power
connector
Jumpers
Drive
connector
A
B
C
Disk drive holder
Tab
Power supply
connector
Drive connector